Comparison of impact and high rate tests for determining properties of adhesives and polymers needed for design under impact loading Performance of Adhesives Joints Programme Project PAJ2

The performance of adhesive joints 1996-1999 Report no. 11 - an intercomparison of track measurements

Duncan, B.
Lay, L.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

The performance of adhesive joints Project PAJ3 - combined cyclic loading and hostile environments 1996-1999; report no 12 - cyclic fatigue testing of adhesive joints environmental effects

Mera, R.
Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

Rate and temperature dependent mechanical properties of a flexible adhesive

Duncan, B.
Hinopoulos, G.
Ogilvy-Robb, K.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 2000

'The Performance of Adhesive Joints', a materials metrology research programme funded by the DTIAvai...

Impact tests

Goglio L.

January 2018

Assessing the mechanical properties of adhesives and the joints strength requires specific tests. In...

The performance of adhesive joints 1996-1999 No. 3 - proposed draft for the revision of ISO 11003-2 - the thick-adherend shear test method

Dean, G.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A materials metrology research programme funded by the DTI; Project PAJ2 Dynamic Performance of Adhe...

The performance of adhesive joints Project PAJ1 - failure criteria and their application to visco-elastic/visco-plastic materials; report no 18 - verification of hyperelastic test methods

Maxwell, A.
Croker, L.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

The performance of adhesive joints 1996-1999 Report no. 1 - review of durability test methods and standards for assessing long term performance of adhesive joints

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A materials metrology research programme funded by the DTI; Project PAJ3 Combined Cycle Loading and ...

Test methods for assessing durability performance of adhesive joints

Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

Project PAJ3 - Combined cyclic loading and hostile environments 1996-1999 report no. 18Available fro...

The performance of adhesive joints 1996-1999 Report no. 13 - measurement methods for time-dependent properties of flexible adhesives

Duncan, B.
Maxwell, A.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

Methods for measuring strains at high rates

Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1998

Project PAJ2: Dynamic performance of adhesive bondsAvailable from British Library Document Supply Ce...

The performance of adhesive joints 1996-1999 Report no. 15 - comparison between rheological and bulk specimen tests for creep and stress relation properties

Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

Non-linear analysis and testing of adhesive joints under impact and quasi-static loading

Harris, J.A

January 1983

SIGLEAvailable from British Library Document Supply Centre- DSC:DX88646 / BLDSC - British Library Do...

The performance of adhesive joints 1996-1999 Project PAJ3; combined cyclic loading and hostile environments 1996-1999; report no. 7, environmental degradation of adhesive joints accelerated testing

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

The performance of adhesive joints 1996-1999 Report no. 12 - evaluation of a multi-functional adhesives test station

Maxwell, A.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ12 Failure Criteria and their...

Impact testing and analysis of adhesive bonds

Cheng, Soon Kiong.

January 1998

The project attempts to develop an impact reliability testing analysis methodology for adhesive bond...

The performance of adhesive joints 1996-1999 Report no. 11 - an intercomparison of track measurements

Duncan, B.
Lay, L.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

The performance of adhesive joints Project PAJ3 - combined cyclic loading and hostile environments 1996-1999; report no 12 - cyclic fatigue testing of adhesive joints environmental effects

Mera, R.
Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

Rate and temperature dependent mechanical properties of a flexible adhesive

Duncan, B.
Hinopoulos, G.
Ogilvy-Robb, K.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 2000

'The Performance of Adhesive Joints', a materials metrology research programme funded by the DTIAvai...

Impact tests

Goglio L.

January 2018

Assessing the mechanical properties of adhesives and the joints strength requires specific tests. In...

The performance of adhesive joints 1996-1999 No. 3 - proposed draft for the revision of ISO 11003-2 - the thick-adherend shear test method

Dean, G.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A materials metrology research programme funded by the DTI; Project PAJ2 Dynamic Performance of Adhe...

The performance of adhesive joints Project PAJ1 - failure criteria and their application to visco-elastic/visco-plastic materials; report no 18 - verification of hyperelastic test methods

Maxwell, A.
Croker, L.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

The performance of adhesive joints 1996-1999 Report no. 1 - review of durability test methods and standards for assessing long term performance of adhesive joints

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A materials metrology research programme funded by the DTI; Project PAJ3 Combined Cycle Loading and ...

Test methods for assessing durability performance of adhesive joints

Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

Project PAJ3 - Combined cyclic loading and hostile environments 1996-1999 report no. 18Available fro...

The performance of adhesive joints 1996-1999 Report no. 13 - measurement methods for time-dependent properties of flexible adhesives

Duncan, B.
Maxwell, A.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

Methods for measuring strains at high rates

Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1998

Project PAJ2: Dynamic performance of adhesive bondsAvailable from British Library Document Supply Ce...

The performance of adhesive joints 1996-1999 Report no. 15 - comparison between rheological and bulk specimen tests for creep and stress relation properties

Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

Non-linear analysis and testing of adhesive joints under impact and quasi-static loading

Harris, J.A

January 1983

SIGLEAvailable from British Library Document Supply Centre- DSC:DX88646 / BLDSC - British Library Do...

The performance of adhesive joints 1996-1999 Project PAJ3; combined cyclic loading and hostile environments 1996-1999; report no. 7, environmental degradation of adhesive joints accelerated testing

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

The performance of adhesive joints 1996-1999 Report no. 12 - evaluation of a multi-functional adhesives test station

Maxwell, A.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ12 Failure Criteria and their...

Impact testing and analysis of adhesive bonds

Cheng, Soon Kiong.

January 1998

The project attempts to develop an impact reliability testing analysis methodology for adhesive bond...

The performance of adhesive joints 1996-1999 Report no. 11 - an intercomparison of track measurements

Duncan, B.
Lay, L.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

The performance of adhesive joints Project PAJ3 - combined cyclic loading and hostile environments 1996-1999; report no 12 - cyclic fatigue testing of adhesive joints environmental effects

Mera, R.
Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

Rate and temperature dependent mechanical properties of a flexible adhesive

Duncan, B.
Hinopoulos, G.
Ogilvy-Robb, K.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 2000

'The Performance of Adhesive Joints', a materials metrology research programme funded by the DTIAvai...

Comparison of impact and high rate tests for determining properties of adhesives and polymers needed for design under impact loading Performance of Adhesives Joints Programme Project PAJ2

Abstract

Extracted data

Comparison of impact and high rate tests for determining properties of adhesives and polymers needed for design under impact loading Performance of Adhesives Joints Programme Project PAJ2

Abstract

Extracted data

Related items

Related items