Rate and temperature dependent mechanical properties of a flexible adhesive

AN EXPERIMENTAL STUDY OF THE MECHANICAL BEHAVIOUR OF ADHESIVELY BONDED JOINTS AS A FUNCTION OF TEMPERATURE

Mariana Doina Banea
Lucas F. M. Da Silva

February 2015

Adhesively bonded joints are an increasing alternative to mechanical joints in engineering applicati...

Comparison of impact and high rate tests for determining properties of adhesives and polymers needed for design under impact loading Performance of Adhesives Joints Programme Project PAJ2

Duncan, B.
Pearce, A.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

Dynamic properties of adhesive bonds report no. 9SIGLEAvailable from British Library Document Supply...

The performance of adhesive joints Project PAJ1 - failure criteria and their application to visco-elastic/visco-plastic materials; report no 18 - verification of hyperelastic test methods

Maxwell, A.
Croker, L.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

The performance of adhesive joints 1996-1999 Report no. 13 - measurement methods for time-dependent properties of flexible adhesives

Duncan, B.
Maxwell, A.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

Strain rate and temperature dependence of the properties of adhesives Prediction of high-rate data

Read, B.
Dean, G.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(169) / BLDSC - British Lib...

Failure of flexible adhesive joints Project Pajex2: flexible adhesives; report no 5

Duncan, B.
Crocker, L.
Urquhart, J. (and others)
National Physical Lab., Teddington (United Kingdom)

January 2001

'The performance of adhesive joints', a materials metrology research programme funded by the DTIAvai...

Effects of specimen geometry on the strength of flexible adhesive joints

Broughton, W.
Arranz, E.
Mera, R.
National Physical Laboratory, Teddington (United Kingdom). Materials Centre

January 2001

Part of the 'Performance of Adhesive Joints Programme' funded by the Engineering Industries Director...

The performance of adhesive joints 1996-1999 No. 3 - proposed draft for the revision of ISO 11003-2 - the thick-adherend shear test method

Dean, G.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A materials metrology research programme funded by the DTI; Project PAJ2 Dynamic Performance of Adhe...

RATE AND TEMPERATURE DEPENDENT MECHANICAL PROPERTIES OF A FLEXIBLE ADHESIVE

Bruce Duncan
George Hinopoulos
Keith Ogilvy-robb
Elena Arranz
Bruce Duncan
George Hinopoulos
Keith Ogilvy-robb
Elena Arranz

January 2000

Design stress analyses of adhesively bonded structures may be performed using Finite Element methods...

The performance of adhesive joints 1996-1999 Report no. 1 - review of durability test methods and standards for assessing long term performance of adhesive joints

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A materials metrology research programme funded by the DTI; Project PAJ3 Combined Cycle Loading and ...

The performance of adhesive joints 1996-1999 Report no. 12 - evaluation of a multi-functional adhesives test station

Maxwell, A.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ12 Failure Criteria and their...

The performance of adhesive joints 1996-1999 Report no 2 - review of life prediction methodology and adhesive joint design and analysis software

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A material metrology research programme funded by the DTI; Project PAJ3 Combined Cyclic Loading and ...

The performance of adhesive joints 1996-1999 Report no. 11 - an intercomparison of track measurements

Duncan, B.
Lay, L.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

Geometric and material property effects on the strength of rubber-toughened adhesive joints

Broughton, W.
Crocker, L.
Urquhart, J.
National Physical Lab., Teddington (United Kingdom). Materials Centre

January 2001

Part of the 'Performance of Adhesive Joints Extension Programme' funded by the Engineering Industrie...

Test methods for determining hyperelastic properties of flexible adhesives

Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:5413.5656(54) / BLDSC - British Libra...

AN EXPERIMENTAL STUDY OF THE MECHANICAL BEHAVIOUR OF ADHESIVELY BONDED JOINTS AS A FUNCTION OF TEMPERATURE

Mariana Doina Banea
Lucas F. M. Da Silva

February 2015

Adhesively bonded joints are an increasing alternative to mechanical joints in engineering applicati...

Comparison of impact and high rate tests for determining properties of adhesives and polymers needed for design under impact loading Performance of Adhesives Joints Programme Project PAJ2

Duncan, B.
Pearce, A.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

Dynamic properties of adhesive bonds report no. 9SIGLEAvailable from British Library Document Supply...

The performance of adhesive joints Project PAJ1 - failure criteria and their application to visco-elastic/visco-plastic materials; report no 18 - verification of hyperelastic test methods

Maxwell, A.
Croker, L.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

The performance of adhesive joints 1996-1999 Report no. 13 - measurement methods for time-dependent properties of flexible adhesives

Duncan, B.
Maxwell, A.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

Strain rate and temperature dependence of the properties of adhesives Prediction of high-rate data

Read, B.
Dean, G.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(169) / BLDSC - British Lib...

Failure of flexible adhesive joints Project Pajex2: flexible adhesives; report no 5

Duncan, B.
Crocker, L.
Urquhart, J. (and others)
National Physical Lab., Teddington (United Kingdom)

January 2001

'The performance of adhesive joints', a materials metrology research programme funded by the DTIAvai...

Effects of specimen geometry on the strength of flexible adhesive joints

Broughton, W.
Arranz, E.
Mera, R.
National Physical Laboratory, Teddington (United Kingdom). Materials Centre

January 2001

Part of the 'Performance of Adhesive Joints Programme' funded by the Engineering Industries Director...

The performance of adhesive joints 1996-1999 No. 3 - proposed draft for the revision of ISO 11003-2 - the thick-adherend shear test method

Dean, G.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A materials metrology research programme funded by the DTI; Project PAJ2 Dynamic Performance of Adhe...

RATE AND TEMPERATURE DEPENDENT MECHANICAL PROPERTIES OF A FLEXIBLE ADHESIVE

Bruce Duncan
George Hinopoulos
Keith Ogilvy-robb
Elena Arranz
Bruce Duncan
George Hinopoulos
Keith Ogilvy-robb
Elena Arranz

January 2000

Design stress analyses of adhesively bonded structures may be performed using Finite Element methods...

The performance of adhesive joints 1996-1999 Report no. 1 - review of durability test methods and standards for assessing long term performance of adhesive joints

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A materials metrology research programme funded by the DTI; Project PAJ3 Combined Cycle Loading and ...

The performance of adhesive joints 1996-1999 Report no. 12 - evaluation of a multi-functional adhesives test station

Maxwell, A.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ12 Failure Criteria and their...

The performance of adhesive joints 1996-1999 Report no 2 - review of life prediction methodology and adhesive joint design and analysis software

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A material metrology research programme funded by the DTI; Project PAJ3 Combined Cyclic Loading and ...

The performance of adhesive joints 1996-1999 Report no. 11 - an intercomparison of track measurements

Duncan, B.
Lay, L.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

Geometric and material property effects on the strength of rubber-toughened adhesive joints

Broughton, W.
Crocker, L.
Urquhart, J.
National Physical Lab., Teddington (United Kingdom). Materials Centre

January 2001

Part of the 'Performance of Adhesive Joints Extension Programme' funded by the Engineering Industrie...

Test methods for determining hyperelastic properties of flexible adhesives

Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

SIGLEAvailable from British Library Document Supply Centre-DSC:5413.5656(54) / BLDSC - British Libra...

AN EXPERIMENTAL STUDY OF THE MECHANICAL BEHAVIOUR OF ADHESIVELY BONDED JOINTS AS A FUNCTION OF TEMPERATURE

Mariana Doina Banea
Lucas F. M. Da Silva

February 2015

Adhesively bonded joints are an increasing alternative to mechanical joints in engineering applicati...

Comparison of impact and high rate tests for determining properties of adhesives and polymers needed for design under impact loading Performance of Adhesives Joints Programme Project PAJ2

Duncan, B.
Pearce, A.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

Dynamic properties of adhesive bonds report no. 9SIGLEAvailable from British Library Document Supply...

The performance of adhesive joints Project PAJ1 - failure criteria and their application to visco-elastic/visco-plastic materials; report no 18 - verification of hyperelastic test methods

Maxwell, A.
Croker, L.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

Rate and temperature dependent mechanical properties of a flexible adhesive

Abstract

Extracted data

Rate and temperature dependent mechanical properties of a flexible adhesive

Abstract

Extracted data

Related items

Related items