The performance of adhesive joints 1996-1999 Report no. 13 - measurement methods for time-dependent properties of flexible adhesives

The performance of adhesive joints Project PAJ3 - combined cyclic loading and hostile environments 1996-1999; report no 12 - cyclic fatigue testing of adhesive joints environmental effects

Mera, R.
Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

Comparison of impact and high rate tests for determining properties of adhesives and polymers needed for design under impact loading Performance of Adhesives Joints Programme Project PAJ2

Duncan, B.
Pearce, A.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

Dynamic properties of adhesive bonds report no. 9SIGLEAvailable from British Library Document Supply...

Measurement Good Practice Guide No. 47 Preparation and Testing of Adhesive Joints

Bill Broughton
Mike Gower

January 2001

A number of factors, not included in written standards, can significantly affect the reliability (i....

The performance of adhesive joints 1996-1999 Report no. 11 - an intercomparison of track measurements

Duncan, B.
Lay, L.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

The performance of adhesive joints 1996-1999 Report no. 12 - evaluation of a multi-functional adhesives test station

Maxwell, A.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ12 Failure Criteria and their...

The performance of adhesive joints Project PAJ1 - failure criteria and their application to visco-elastic/visco-plastic materials; report no 18 - verification of hyperelastic test methods

Maxwell, A.
Croker, L.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

Failure of flexible adhesive joints Project Pajex2: flexible adhesives; report no 5

Duncan, B.
Crocker, L.
Urquhart, J. (and others)
National Physical Lab., Teddington (United Kingdom)

January 2001

'The performance of adhesive joints', a materials metrology research programme funded by the DTIAvai...

Performance of Adhesive Joints Programme Project PAJ1- Failure Criteria and their Application to Visco-Elastic/Visco-Plastic Materials

B C Duncan

January 1999

Project PAJ1 Failure Criteria and their Application to Visco-Elastic/Visco-Plastic Materials was one...

The performance of adhesive joints 1996-1999 Report no. 15 - comparison between rheological and bulk specimen tests for creep and stress relation properties

Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

Rate and temperature dependent mechanical properties of a flexible adhesive

Duncan, B.
Hinopoulos, G.
Ogilvy-Robb, K.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 2000

'The Performance of Adhesive Joints', a materials metrology research programme funded by the DTIAvai...

The performance of adhesive joints 1996-1999 Report no. 1 - review of durability test methods and standards for assessing long term performance of adhesive joints

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A materials metrology research programme funded by the DTI; Project PAJ3 Combined Cycle Loading and ...

The performance of adhesive joints 1996-1999 Report no 2 - review of life prediction methodology and adhesive joint design and analysis software

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A material metrology research programme funded by the DTI; Project PAJ3 Combined Cyclic Loading and ...

The performance of adhesive joints 1996-1999 No. 3 - proposed draft for the revision of ISO 11003-2 - the thick-adherend shear test method

Dean, G.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A materials metrology research programme funded by the DTI; Project PAJ2 Dynamic Performance of Adhe...

The performance of adhesive joints 1996-1999 Project PAJ3; combined cyclic loading and hostile environments 1996-1999; report no. 7, environmental degradation of adhesive joints accelerated testing

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

Effects of specimen geometry on the strength of flexible adhesive joints

Broughton, W.
Arranz, E.
Mera, R.
National Physical Laboratory, Teddington (United Kingdom). Materials Centre

January 2001

Part of the 'Performance of Adhesive Joints Programme' funded by the Engineering Industries Director...

The performance of adhesive joints Project PAJ3 - combined cyclic loading and hostile environments 1996-1999; report no 12 - cyclic fatigue testing of adhesive joints environmental effects

Mera, R.
Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

Comparison of impact and high rate tests for determining properties of adhesives and polymers needed for design under impact loading Performance of Adhesives Joints Programme Project PAJ2

Duncan, B.
Pearce, A.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

Dynamic properties of adhesive bonds report no. 9SIGLEAvailable from British Library Document Supply...

Measurement Good Practice Guide No. 47 Preparation and Testing of Adhesive Joints

Bill Broughton
Mike Gower

January 2001

A number of factors, not included in written standards, can significantly affect the reliability (i....

The performance of adhesive joints 1996-1999 Report no. 11 - an intercomparison of track measurements

Duncan, B.
Lay, L.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

The performance of adhesive joints 1996-1999 Report no. 12 - evaluation of a multi-functional adhesives test station

Maxwell, A.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ12 Failure Criteria and their...

The performance of adhesive joints Project PAJ1 - failure criteria and their application to visco-elastic/visco-plastic materials; report no 18 - verification of hyperelastic test methods

Maxwell, A.
Croker, L.
Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

Failure of flexible adhesive joints Project Pajex2: flexible adhesives; report no 5

Duncan, B.
Crocker, L.
Urquhart, J. (and others)
National Physical Lab., Teddington (United Kingdom)

January 2001

'The performance of adhesive joints', a materials metrology research programme funded by the DTIAvai...

Performance of Adhesive Joints Programme Project PAJ1- Failure Criteria and their Application to Visco-Elastic/Visco-Plastic Materials

B C Duncan

January 1999

Project PAJ1 Failure Criteria and their Application to Visco-Elastic/Visco-Plastic Materials was one...

The performance of adhesive joints 1996-1999 Report no. 15 - comparison between rheological and bulk specimen tests for creep and stress relation properties

Duncan, B.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

Rate and temperature dependent mechanical properties of a flexible adhesive

Duncan, B.
Hinopoulos, G.
Ogilvy-Robb, K.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 2000

'The Performance of Adhesive Joints', a materials metrology research programme funded by the DTIAvai...

The performance of adhesive joints 1996-1999 Report no. 1 - review of durability test methods and standards for assessing long term performance of adhesive joints

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A materials metrology research programme funded by the DTI; Project PAJ3 Combined Cycle Loading and ...

The performance of adhesive joints 1996-1999 Report no 2 - review of life prediction methodology and adhesive joint design and analysis software

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A material metrology research programme funded by the DTI; Project PAJ3 Combined Cyclic Loading and ...

The performance of adhesive joints 1996-1999 No. 3 - proposed draft for the revision of ISO 11003-2 - the thick-adherend shear test method

Dean, G.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A materials metrology research programme funded by the DTI; Project PAJ2 Dynamic Performance of Adhe...

The performance of adhesive joints 1996-1999 Project PAJ3; combined cyclic loading and hostile environments 1996-1999; report no. 7, environmental degradation of adhesive joints accelerated testing

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

Effects of specimen geometry on the strength of flexible adhesive joints

Broughton, W.
Arranz, E.
Mera, R.
National Physical Laboratory, Teddington (United Kingdom). Materials Centre

January 2001

Part of the 'Performance of Adhesive Joints Programme' funded by the Engineering Industries Director...

The performance of adhesive joints Project PAJ3 - combined cyclic loading and hostile environments 1996-1999; report no 12 - cyclic fatigue testing of adhesive joints environmental effects

Mera, R.
Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

Comparison of impact and high rate tests for determining properties of adhesives and polymers needed for design under impact loading Performance of Adhesives Joints Programme Project PAJ2

Duncan, B.
Pearce, A.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

Dynamic properties of adhesive bonds report no. 9SIGLEAvailable from British Library Document Supply...

Measurement Good Practice Guide No. 47 Preparation and Testing of Adhesive Joints

Bill Broughton
Mike Gower

January 2001

A number of factors, not included in written standards, can significantly affect the reliability (i....

The performance of adhesive joints 1996-1999 Report no. 13 - measurement methods for time-dependent properties of flexible adhesives

Abstract

Extracted data

The performance of adhesive joints 1996-1999 Report no. 13 - measurement methods for time-dependent properties of flexible adhesives

Abstract

Extracted data

Related items

Related items