The performance of adhesive joints Project PAJ3 - combined cyclic loading and hostile environments 1996-1999; report no 12 - cyclic fatigue testing of adhesive joints environmental effects

Fatigue performance and durability of structural adhesive joints

Mays, G.C

January 1985

SIGLEAvailable from British Library Document Supply Centre- DSC:D176544 / BLDSC - British Library Do...

The fatigue performance of adhesively-bonded metal joints

Jethwa, J.K

January 1995

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN006687 / BLDSC - British Library D...

The performance of adhesive joints 1996-1999 Report no. 11 - an intercomparison of track measurements

Duncan, B.
Lay, L.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

The performance of adhesive joints 1996-1999 Project PAJ3; combined cyclic loading and hostile environments 1996-1999; report no. 7, environmental degradation of adhesive joints accelerated testing

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

The performance of adhesive joints 1996-1999 Project PAJ3; combined cyclic loading and hostile environments report 3; a guide to the use of design of experiment methods

Olusanya, A.
Hall, M.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(CMMT(A)67) / BLDSC - Briti...

The performance of adhesive joints 1996-1999 Report no. 1 - review of durability test methods and standards for assessing long term performance of adhesive joints

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A materials metrology research programme funded by the DTI; Project PAJ3 Combined Cycle Loading and ...

The performance of adhesive joints 1996-1999 Report no 2 - review of life prediction methodology and adhesive joint design and analysis software

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A material metrology research programme funded by the DTI; Project PAJ3 Combined Cyclic Loading and ...

Statistical analysis of durability data Project PAJ3 - combined cyclic loading and hostile environments 1996-1999; report no 16

Twine, T.
Hall, M.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

The Performance of Adhesive Joints, a materials metrology research programme funded by the DTIAvaila...

Test methods for assessing durability performance of adhesive joints

Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

Project PAJ3 - Combined cyclic loading and hostile environments 1996-1999 report no. 18Available fro...

Creep testing of adhesive joints T-peel test Project PAJ3 - combined cyclic loading and hostile environments 1996-1999; report no. 13

Broughton, W.
Mera, R.
Hinopoulos, G.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

The Performance of Adhesive Joints, a materials metrology research programme funded by the DTIAvaila...

The cyclic fatigue behaviour of adhesive joints

Kinloch, A.
Fernando, M.
Lam, P
Imperial Coll. of Science and Technology, London (United Kingdom). Dept. of Mechanical Engineering

January 1993

SIGLEAvailable from British Library Document Supply Centre- DSC:0678.231F(AD-A--277-080)(microfiche)...

The use of statistical methods for evaluating durability of adhesively bonded joints

Twine, T.Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

Project PAJ3 - Combined cyclic loading and hostile environments 1996-1999 report no. 17Available fro...

The performance of adhesive joints 1996-1999 Project PAJ3; combined cyclic loading and hostile environments 1996-1999; report no 9, an improved modelling approach of moisture absorption in adhesive joints using the finite element method

Hinopoulos, G.
Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

Evaluation of the T-peel joint using the finite element method Project PAJ3 - combined cyclic loading and hostile environments 1996-1999

Hinopoulos, G.
Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

The Performance of Adhesive Joints, a materials metrology research programme funded by the DTIAvaila...

Cyclic Fatigue Testing of Adhesive Joints: Environmental Effects

W R Broughton
R D Mera
W R Broughton
R D Mera

January 1999

This report examines the combined effect of cyclic loading and environment (i.e. elevated temperatur...

Fatigue performance and durability of structural adhesive joints

Mays, G.C

January 1985

SIGLEAvailable from British Library Document Supply Centre- DSC:D176544 / BLDSC - British Library Do...

The fatigue performance of adhesively-bonded metal joints

Jethwa, J.K

January 1995

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN006687 / BLDSC - British Library D...

The performance of adhesive joints 1996-1999 Report no. 11 - an intercomparison of track measurements

Duncan, B.
Lay, L.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

The performance of adhesive joints 1996-1999 Project PAJ3; combined cyclic loading and hostile environments 1996-1999; report no. 7, environmental degradation of adhesive joints accelerated testing

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

The performance of adhesive joints 1996-1999 Project PAJ3; combined cyclic loading and hostile environments report 3; a guide to the use of design of experiment methods

Olusanya, A.
Hall, M.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

SIGLEAvailable from British Library Document Supply Centre-DSC:6029.28073(CMMT(A)67) / BLDSC - Briti...

The performance of adhesive joints 1996-1999 Report no. 1 - review of durability test methods and standards for assessing long term performance of adhesive joints

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A materials metrology research programme funded by the DTI; Project PAJ3 Combined Cycle Loading and ...

The performance of adhesive joints 1996-1999 Report no 2 - review of life prediction methodology and adhesive joint design and analysis software

Broughton, W.
Mera, R.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1997

A material metrology research programme funded by the DTI; Project PAJ3 Combined Cyclic Loading and ...

Statistical analysis of durability data Project PAJ3 - combined cyclic loading and hostile environments 1996-1999; report no 16

Twine, T.
Hall, M.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

The Performance of Adhesive Joints, a materials metrology research programme funded by the DTIAvaila...

Test methods for assessing durability performance of adhesive joints

Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

Project PAJ3 - Combined cyclic loading and hostile environments 1996-1999 report no. 18Available fro...

Creep testing of adhesive joints T-peel test Project PAJ3 - combined cyclic loading and hostile environments 1996-1999; report no. 13

Broughton, W.
Mera, R.
Hinopoulos, G.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

The Performance of Adhesive Joints, a materials metrology research programme funded by the DTIAvaila...

The cyclic fatigue behaviour of adhesive joints

Kinloch, A.
Fernando, M.
Lam, P
Imperial Coll. of Science and Technology, London (United Kingdom). Dept. of Mechanical Engineering

January 1993

SIGLEAvailable from British Library Document Supply Centre- DSC:0678.231F(AD-A--277-080)(microfiche)...

The use of statistical methods for evaluating durability of adhesively bonded joints

Twine, T.Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

Project PAJ3 - Combined cyclic loading and hostile environments 1996-1999 report no. 17Available fro...

The performance of adhesive joints 1996-1999 Project PAJ3; combined cyclic loading and hostile environments 1996-1999; report no 9, an improved modelling approach of moisture absorption in adhesive joints using the finite element method

Hinopoulos, G.
Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the Dept. of Trade and IndustryAvailable from Bri...

Evaluation of the T-peel joint using the finite element method Project PAJ3 - combined cyclic loading and hostile environments 1996-1999

Hinopoulos, G.
Broughton, W.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

The Performance of Adhesive Joints, a materials metrology research programme funded by the DTIAvaila...

Cyclic Fatigue Testing of Adhesive Joints: Environmental Effects

W R Broughton
R D Mera
W R Broughton
R D Mera

January 1999

This report examines the combined effect of cyclic loading and environment (i.e. elevated temperatur...

Fatigue performance and durability of structural adhesive joints

Mays, G.C

January 1985

SIGLEAvailable from British Library Document Supply Centre- DSC:D176544 / BLDSC - British Library Do...

The fatigue performance of adhesively-bonded metal joints

Jethwa, J.K

January 1995

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN006687 / BLDSC - British Library D...

The performance of adhesive joints 1996-1999 Report no. 11 - an intercomparison of track measurements

Duncan, B.
Lay, L.
National Physical Lab., Teddington (United Kingdom). Centre for Materials Measurement and Technology

January 1999

A materials metrology research programme funded by the DTI; Project PAJ1 Failure Criteria and their ...

The performance of adhesive joints Project PAJ3 - combined cyclic loading and hostile environments 1996-1999; report no 12 - cyclic fatigue testing of adhesive joints environmental effects

Abstract

Extracted data

The performance of adhesive joints Project PAJ3 - combined cyclic loading and hostile environments 1996-1999; report no 12 - cyclic fatigue testing of adhesive joints environmental effects

Abstract

Extracted data

Related items

Related items