Add to ORKGThe deminer was tasked to clear across the slope before clearing up the slope and it appears that he has carelessly moved into an unclear area before physically clearing it and has stepped on a PMN Mine. [The Victim suffered] Lower left leg amputation and injury to upper right arm and lower right leg
The victim had been a deminer for three years. It was two months since he had last attended a revisi...
On 22 August 2008 while de-miner [the Victim] was working in his clearance lane from up downward dir...
A preliminary accident report from the demining group simply recorded that while prodding he was in...
[The Victim] was working in one of the closest lanes to MDU, therefore, he also stopped the operatio...
At 10:30 the victim was walking through the area to reach the rest area when he stood on a mine, tho...
Deminer [Name removed] starts his work after the guidance of his section leader. As the working was ...
On 10 April 2007 at 1155 hrs while deminer [the Victim] with employ No. 4094 was working in his clea...
On 01 November 2007 at 09:50 am an accident happened on [the Victim] deminer of section # 2 of the m...
The deminer and his partner were unable to use detectors (because they were reading continuously a...
During the establishment of the boundary lane [the Victim] stepped on a PNM - 2 anti personnel mine ...
On 27 May 2009 at 0840 hrs [the Victim] the section leader of [Demining group] DT-16 entered to a mi...
On 17 June 2010 at 11:00 [the Victim] was busy in his clearance lane in a steep sloping area, he los...
The investigators determined that the victim returned to his breaching lane after the short break an...
The victim was excavating at 11:08 when he initiated a PMA-3 [identified by inference] with his left...
According to the AMAC Northeast’s investigation report, the accident occurred while the deminer was ...
The victim had been a deminer for three years. It was two months since he had last attended a revisi...
On 22 August 2008 while de-miner [the Victim] was working in his clearance lane from up downward dir...
A preliminary accident report from the demining group simply recorded that while prodding he was in...
[The Victim] was working in one of the closest lanes to MDU, therefore, he also stopped the operatio...
At 10:30 the victim was walking through the area to reach the rest area when he stood on a mine, tho...
Deminer [Name removed] starts his work after the guidance of his section leader. As the working was ...
On 10 April 2007 at 1155 hrs while deminer [the Victim] with employ No. 4094 was working in his clea...
On 01 November 2007 at 09:50 am an accident happened on [the Victim] deminer of section # 2 of the m...
The deminer and his partner were unable to use detectors (because they were reading continuously a...
During the establishment of the boundary lane [the Victim] stepped on a PNM - 2 anti personnel mine ...
On 27 May 2009 at 0840 hrs [the Victim] the section leader of [Demining group] DT-16 entered to a mi...
On 17 June 2010 at 11:00 [the Victim] was busy in his clearance lane in a steep sloping area, he los...
The investigators determined that the victim returned to his breaching lane after the short break an...
The victim was excavating at 11:08 when he initiated a PMA-3 [identified by inference] with his left...
According to the AMAC Northeast’s investigation report, the accident occurred while the deminer was ...
The victim had been a deminer for three years. It was two months since he had last attended a revisi...
On 22 August 2008 while de-miner [the Victim] was working in his clearance lane from up downward dir...
A preliminary accident report from the demining group simply recorded that while prodding he was in...