Add to ORKGOn 22 August 2008 while de-miner [the Victim] was working in his clearance lane from up downward direction. He used scraper as a standard tool for excavation, but the area was hard and bushy. The de-miner hit the mine directly on its top during excavation and caused the explosion. However the deminer had worn his PPE but has got some injuries on his finger and arm of his right hand
On 10 April 2007 at 1155 hrs while deminer [the Victim] with employ No. 4094 was working in his clea...
On 5th Nov 2009 at 08:45 am deminer [Victim No.1] was working in his clearance lane: he was removing...
On 18 April 2009 [Demining group] DT-05 started clearance operation on mentioned task, they cleared ...
On 15 August 2010 while [the Victim] deminer was busy in his clearance lane excavating a detected si...
On 17 August 2010 [the Victim] the deminer was working in his clearance lane excavating a detected s...
On 30 December 2008 deminer de- miner [the Victim] was busy in excavation of a detected signal in hi...
On 17 August 2010 Mr. [the Victim] the deminer was working in his clearance lane excavating a detect...
On 13/12/2007 at 11:05hrs a demining accident happened on a deminer named [the Victim] as he was wor...
On 04 Oct 2009 at 08:35 hrs when [the Victim] deminer was working on a signal in his clearance lane ...
The Deminer was using mine detector. In result, he found a signal, so he excavated the ground till h...
On the 13th Dec 2010 at 10:37, the deminer [Victim No.1] was operating in his clearance lane excavat...
On 18 October 2007 at 10:45 Hrs, the accident occurred on [the Victim] deminer of [Demining group] D...
According to the AMAC Northeast’s investigation report, the accident occurred while the deminer was ...
In one of the lane where [the Victim] deminer was excavating the ground to locate a signal made by i...
On 17 August 2010 while [the Victim] was working in his clearance lane, his excavation tool touched ...
On 10 April 2007 at 1155 hrs while deminer [the Victim] with employ No. 4094 was working in his clea...
On 5th Nov 2009 at 08:45 am deminer [Victim No.1] was working in his clearance lane: he was removing...
On 18 April 2009 [Demining group] DT-05 started clearance operation on mentioned task, they cleared ...
On 15 August 2010 while [the Victim] deminer was busy in his clearance lane excavating a detected si...
On 17 August 2010 [the Victim] the deminer was working in his clearance lane excavating a detected s...
On 30 December 2008 deminer de- miner [the Victim] was busy in excavation of a detected signal in hi...
On 17 August 2010 Mr. [the Victim] the deminer was working in his clearance lane excavating a detect...
On 13/12/2007 at 11:05hrs a demining accident happened on a deminer named [the Victim] as he was wor...
On 04 Oct 2009 at 08:35 hrs when [the Victim] deminer was working on a signal in his clearance lane ...
The Deminer was using mine detector. In result, he found a signal, so he excavated the ground till h...
On the 13th Dec 2010 at 10:37, the deminer [Victim No.1] was operating in his clearance lane excavat...
On 18 October 2007 at 10:45 Hrs, the accident occurred on [the Victim] deminer of [Demining group] D...
According to the AMAC Northeast’s investigation report, the accident occurred while the deminer was ...
In one of the lane where [the Victim] deminer was excavating the ground to locate a signal made by i...
On 17 August 2010 while [the Victim] was working in his clearance lane, his excavation tool touched ...
On 10 April 2007 at 1155 hrs while deminer [the Victim] with employ No. 4094 was working in his clea...
On 5th Nov 2009 at 08:45 am deminer [Victim No.1] was working in his clearance lane: he was removing...
On 18 April 2009 [Demining group] DT-05 started clearance operation on mentioned task, they cleared ...