Add to ORKGAccording to the AMAC Northeast’s investigation report, the accident occurred while the deminer was excavating on a reading in a cross lane (cut lane). As a result of this accident, the deminer received some light injuries on both hands. According to the Assistant Team Leader, the mine position had changed and the deminer’s bayonet touched the top of the mine and detonated
On 04 Oct 2009 at 08:35 hrs when [the Victim] deminer was working on a signal in his clearance lane ...
On 11 Oct 2009 at 12:15 am while [the Victim] deminer was excavating a detected signal in his cleara...
On 2nd June 2007, a demining accident occurred to deminer of [National demining agency] named [the V...
In one of the lane where [the Victim] deminer was excavating the ground to locate a signal made by i...
On 17 August 2010 [the Victim] the deminer was working in his clearance lane excavating a detected s...
On 15 August 2010 while [the Victim] deminer was busy in his clearance lane excavating a detected si...
On 10 May 2009 at 10:35 [the Victim] the deminer of [Demining group] DT-02 was excavating on a detec...
On 19th April-07 at 08:10 hrs while the Deminer was excavating the area by pickaxe suddenly an anti ...
On 17 August 2010 Mr. [the Victim] the deminer was working in his clearance lane excavating a detect...
On 13/12/2007 at 11:05hrs a demining accident happened on a deminer named [the Victim] as he was wor...
On 22 August 2008 while de-miner [the Victim] was working in his clearance lane from up downward dir...
The deminer was doing clearance around an accident site where an AP mine blew off the tire of a car ...
The accident occurred because of carelessness of the deminer as he used chisel directly on the detec...
A [Demining group] Manual Team One, deminer hit a No.10 AP mine from the top that resulted in a mine...
On 29/10/2007 at 09:05 am an accident happened in Lane number 11 where [the Victim] was working. The...
On 04 Oct 2009 at 08:35 hrs when [the Victim] deminer was working on a signal in his clearance lane ...
On 11 Oct 2009 at 12:15 am while [the Victim] deminer was excavating a detected signal in his cleara...
On 2nd June 2007, a demining accident occurred to deminer of [National demining agency] named [the V...
In one of the lane where [the Victim] deminer was excavating the ground to locate a signal made by i...
On 17 August 2010 [the Victim] the deminer was working in his clearance lane excavating a detected s...
On 15 August 2010 while [the Victim] deminer was busy in his clearance lane excavating a detected si...
On 10 May 2009 at 10:35 [the Victim] the deminer of [Demining group] DT-02 was excavating on a detec...
On 19th April-07 at 08:10 hrs while the Deminer was excavating the area by pickaxe suddenly an anti ...
On 17 August 2010 Mr. [the Victim] the deminer was working in his clearance lane excavating a detect...
On 13/12/2007 at 11:05hrs a demining accident happened on a deminer named [the Victim] as he was wor...
On 22 August 2008 while de-miner [the Victim] was working in his clearance lane from up downward dir...
The deminer was doing clearance around an accident site where an AP mine blew off the tire of a car ...
The accident occurred because of carelessness of the deminer as he used chisel directly on the detec...
A [Demining group] Manual Team One, deminer hit a No.10 AP mine from the top that resulted in a mine...
On 29/10/2007 at 09:05 am an accident happened in Lane number 11 where [the Victim] was working. The...
On 04 Oct 2009 at 08:35 hrs when [the Victim] deminer was working on a signal in his clearance lane ...
On 11 Oct 2009 at 12:15 am while [the Victim] deminer was excavating a detected signal in his cleara...
On 2nd June 2007, a demining accident occurred to deminer of [National demining agency] named [the V...