Add to ORKGA preliminary accident report from the demining group simply recorded that while prodding he was injured due to a PMN mine explosion . The victim suffered an amputated thumb with other severe hand injuries, also minor arm, legs, chest, and face injuries
On 18 October 2007 at 10:45 Hrs, the accident occurred on [the Victim] deminer of [Demining group] D...
The investigators determined that the victim was prodding with a bayonet in the squatting position, ...
In one of the lane where [the Victim] deminer was excavating the ground to locate a signal made by i...
The victim had been a deminer for seven years. It was five months since his last revision course and...
The demining team had been working at the site since February. The Victim was working in a breaching...
The investigators determined that the victim had investigated a reading in the squatting position wi...
On July 19 at 07:15 hours an accident happened to [the Victim] deminer while he was working in an ar...
According to the AMAC Northeast’s investigation report, the accident occurred while the deminer was ...
The Deminer was using mine detector. In result, he found a signal, so he excavated the ground till h...
The investigation team concluded that the contributing factor to this accident was Carelessness of d...
The accident area was undulating and steep with dry earth and rock. The team had found many PMNs i...
On 10 April 2007 at 1155 hrs while deminer [the Victim] with employ No. 4094 was working in his clea...
As it was a difficult task for the clearance, and required extra attention and care of command group...
On 22 August 2008 while de-miner [the Victim] was working in his clearance lane from up downward dir...
While Deminer was using mine detector, he found a signal, so he excavated the ground till he found a...
On 18 October 2007 at 10:45 Hrs, the accident occurred on [the Victim] deminer of [Demining group] D...
The investigators determined that the victim was prodding with a bayonet in the squatting position, ...
In one of the lane where [the Victim] deminer was excavating the ground to locate a signal made by i...
The victim had been a deminer for seven years. It was five months since his last revision course and...
The demining team had been working at the site since February. The Victim was working in a breaching...
The investigators determined that the victim had investigated a reading in the squatting position wi...
On July 19 at 07:15 hours an accident happened to [the Victim] deminer while he was working in an ar...
According to the AMAC Northeast’s investigation report, the accident occurred while the deminer was ...
The Deminer was using mine detector. In result, he found a signal, so he excavated the ground till h...
The investigation team concluded that the contributing factor to this accident was Carelessness of d...
The accident area was undulating and steep with dry earth and rock. The team had found many PMNs i...
On 10 April 2007 at 1155 hrs while deminer [the Victim] with employ No. 4094 was working in his clea...
As it was a difficult task for the clearance, and required extra attention and care of command group...
On 22 August 2008 while de-miner [the Victim] was working in his clearance lane from up downward dir...
While Deminer was using mine detector, he found a signal, so he excavated the ground till he found a...
On 18 October 2007 at 10:45 Hrs, the accident occurred on [the Victim] deminer of [Demining group] D...
The investigators determined that the victim was prodding with a bayonet in the squatting position, ...
In one of the lane where [the Victim] deminer was excavating the ground to locate a signal made by i...