This is the author accepted manuscript. The final version is available from Elsevier via http://dx.doi.org/10.1016/j.ultramic.2015.10.003In this paper, we evaluate and compare doping contrast generated inside the scanning electron microscope (SEM) and scanning helium ion microscope (SHIM). Specialised energy-filtering techniques are often required to produce strong doping contrast to map donor distributions using the secondary electron (SE) signal in the SEM. However, strong doping contrast can be obtained from n-type regions in the SHIM, even without energy-filtering. This SHIM technique is more sensitive than the SEM to donor density changes above its sensitivity threshold, i.e. of the order of 10(16) or 10(17)donorscm(-3) respectively on...
The growing use of secondary electron imaging in the scanning electron microscope (SEM) to map dopan...
The dopant contrast in SEM has now been studied for more than a decade, a clear explanation of it re...
We show that, in scanning electron microscopy, it is possible to use the secondary electrons produce...
Due to miniaturisation of semiconductor devices, there is an increasing need for nanoscale character...
As semiconductor devices shrink in size, the challenge of characterisation of their dopant distribu...
One of the ten most important challenges facing the semiconductor industry is to obtain an accurate ...
Both scanning electron microscopes (SEM) and helium ion microscopes (HeIM) are based on the same pri...
This study evaluates the secondary electron (SE) dopant contrast in scanning electron microscopy (SE...
The incorporation of impurity (i.e. dopant) atoms in semiconducting materials is fundamental to all ...
Secondary electron (SE) image contrast from p-type silicon has been studied using field-emission sca...
In this work, the phenomena of beam-induced contamination in charged beam microscopes (i.e. the scan...
Scanning electron microscopy is widely used for imaging of semiconductor structures. Image contrast ...
There is an urgent need for fast, non-destructive and quantitative two-dimensional dopant profiling ...
We demonstrate that energy selective scanning electron microscopy can lead to substantial dopant con...
Contrast between differently doped areas in semiconductors can be observed in the secondary electron...
The growing use of secondary electron imaging in the scanning electron microscope (SEM) to map dopan...
The dopant contrast in SEM has now been studied for more than a decade, a clear explanation of it re...
We show that, in scanning electron microscopy, it is possible to use the secondary electrons produce...
Due to miniaturisation of semiconductor devices, there is an increasing need for nanoscale character...
As semiconductor devices shrink in size, the challenge of characterisation of their dopant distribu...
One of the ten most important challenges facing the semiconductor industry is to obtain an accurate ...
Both scanning electron microscopes (SEM) and helium ion microscopes (HeIM) are based on the same pri...
This study evaluates the secondary electron (SE) dopant contrast in scanning electron microscopy (SE...
The incorporation of impurity (i.e. dopant) atoms in semiconducting materials is fundamental to all ...
Secondary electron (SE) image contrast from p-type silicon has been studied using field-emission sca...
In this work, the phenomena of beam-induced contamination in charged beam microscopes (i.e. the scan...
Scanning electron microscopy is widely used for imaging of semiconductor structures. Image contrast ...
There is an urgent need for fast, non-destructive and quantitative two-dimensional dopant profiling ...
We demonstrate that energy selective scanning electron microscopy can lead to substantial dopant con...
Contrast between differently doped areas in semiconductors can be observed in the secondary electron...
The growing use of secondary electron imaging in the scanning electron microscope (SEM) to map dopan...
The dopant contrast in SEM has now been studied for more than a decade, a clear explanation of it re...
We show that, in scanning electron microscopy, it is possible to use the secondary electrons produce...