A357 and 6082 aluminum alloys strengthened by aluminum nitride nanoparticles were obtained. The process of crystallization of the A357-0.5 wt% Al2O3 and 6082-0.5 wt% Al2O3 alloys was studied under conditions of varying the cooling rate. The A357 and 6082 aluminum alloy structure and hardness were analyzed for the Al2O3 content from 0 to 1 wt%
AbstractIn this research, the feasibility of adding mechanically activated nano-crystalline Al2O3 pa...
In this study, aluminium-aluminium oxide (Al-Al2O3) metal matrix nanocomposites (MMNCs) with the dif...
Aluminum alloys have been widely used in many industrial fields, but their high temperature properti...
A357 and 6082 aluminum alloys strengthened by aluminum nitride nanoparticles were obtained. The proc...
Analysis microstructure of the alloys obtained showed that the introduction of alumina nanoparticles...
Aluminum matrix composites reinforced by nano-ceramic particles are widely used in military, airplan...
The aim of this work was to study the influence of nanoparticles of aluminum nitride on the structur...
The paper present a study on alloys of the Al-Mg system (5–6 wt%) strengthened with nonmetallic nano...
Abstract. Alloy ingots with nominal composition, Al92–xNi8Lax (x = 4 to 6) and Al94–xNi6Lax (x = 6, ...
The development of novel methods for industrial production of metal-matrix composites with improved ...
In this study, 7075 aluminum matrix composites reinforced with 1.5 wt.% nanosized Al2O3 were fabrica...
The present work deals with testing of mechanical properties of Al87Ni7Nd6 and Al88Fe9Nd3 alloys rap...
Nanocomposite Al-based alloys can be obtained with a combination of amorphous, crystalline and quasi...
Surface nanocrystallization (SNC) not only can provide an alternative approach to improving the surf...
In this research the effect of Al2O3 nanoparticles on corrosion behavior of aluminum base alloy (Al-...
AbstractIn this research, the feasibility of adding mechanically activated nano-crystalline Al2O3 pa...
In this study, aluminium-aluminium oxide (Al-Al2O3) metal matrix nanocomposites (MMNCs) with the dif...
Aluminum alloys have been widely used in many industrial fields, but their high temperature properti...
A357 and 6082 aluminum alloys strengthened by aluminum nitride nanoparticles were obtained. The proc...
Analysis microstructure of the alloys obtained showed that the introduction of alumina nanoparticles...
Aluminum matrix composites reinforced by nano-ceramic particles are widely used in military, airplan...
The aim of this work was to study the influence of nanoparticles of aluminum nitride on the structur...
The paper present a study on alloys of the Al-Mg system (5–6 wt%) strengthened with nonmetallic nano...
Abstract. Alloy ingots with nominal composition, Al92–xNi8Lax (x = 4 to 6) and Al94–xNi6Lax (x = 6, ...
The development of novel methods for industrial production of metal-matrix composites with improved ...
In this study, 7075 aluminum matrix composites reinforced with 1.5 wt.% nanosized Al2O3 were fabrica...
The present work deals with testing of mechanical properties of Al87Ni7Nd6 and Al88Fe9Nd3 alloys rap...
Nanocomposite Al-based alloys can be obtained with a combination of amorphous, crystalline and quasi...
Surface nanocrystallization (SNC) not only can provide an alternative approach to improving the surf...
In this research the effect of Al2O3 nanoparticles on corrosion behavior of aluminum base alloy (Al-...
AbstractIn this research, the feasibility of adding mechanically activated nano-crystalline Al2O3 pa...
In this study, aluminium-aluminium oxide (Al-Al2O3) metal matrix nanocomposites (MMNCs) with the dif...
Aluminum alloys have been widely used in many industrial fields, but their high temperature properti...