Add to ORKGAs it was a difficult task for the clearance, and required extra attention and care of command group and deminers themselves, thus the carelessness of deminer was the main contributing factor to this accident. The consequence of this accident is a slight injury to the finger of deminer which indicates that he was fully dressed with PPE
In one of the lane where [the Victim] deminer was excavating the ground to locate a signal made by i...
It is the conclusion of the investigation team that the involved deminer did not properly find the c...
According to the AMAC Northeast’s investigation report, the accident occurred while the deminer was ...
On 18 October 2007 at 10:45 Hrs, the accident occurred on [the Victim] deminer of [Demining group] D...
Carelessness of deminer and poor supervision in terms of not conducted QC, caused the accident, and ...
The investigation team concluded that the contributing factor to this accident was carelessness of d...
The negligence of deminer in terms of not adhering to set procedure for excavation and the failure o...
On 2nd June 2007, a demining accident occurred to deminer of [National demining agency] named [the V...
The accident occurred because of carelessness of the deminer as he used chisel directly on the detec...
The primary cause of this accident is listed as Inadequate equipment because the handtool issued to ...
The accident occurred because of carelessness of the deminer as he used chisel directly on the detec...
On 29/10/2007 at 09:05 am an accident happened in Lane number 11 where [the Victim] was working. The...
It is the conclusion of the investigation team that the carelessness of involved deminer, use of wro...
The investigation team concluded that the contributing factor to this accident was Carelessness of d...
It is the conclusion of the investigation team that the carelessness of involved deminer, poor comma...
In one of the lane where [the Victim] deminer was excavating the ground to locate a signal made by i...
It is the conclusion of the investigation team that the involved deminer did not properly find the c...
According to the AMAC Northeast’s investigation report, the accident occurred while the deminer was ...
On 18 October 2007 at 10:45 Hrs, the accident occurred on [the Victim] deminer of [Demining group] D...
Carelessness of deminer and poor supervision in terms of not conducted QC, caused the accident, and ...
The investigation team concluded that the contributing factor to this accident was carelessness of d...
The negligence of deminer in terms of not adhering to set procedure for excavation and the failure o...
On 2nd June 2007, a demining accident occurred to deminer of [National demining agency] named [the V...
The accident occurred because of carelessness of the deminer as he used chisel directly on the detec...
The primary cause of this accident is listed as Inadequate equipment because the handtool issued to ...
The accident occurred because of carelessness of the deminer as he used chisel directly on the detec...
On 29/10/2007 at 09:05 am an accident happened in Lane number 11 where [the Victim] was working. The...
It is the conclusion of the investigation team that the carelessness of involved deminer, use of wro...
The investigation team concluded that the contributing factor to this accident was Carelessness of d...
It is the conclusion of the investigation team that the carelessness of involved deminer, poor comma...
In one of the lane where [the Victim] deminer was excavating the ground to locate a signal made by i...
It is the conclusion of the investigation team that the involved deminer did not properly find the c...
According to the AMAC Northeast’s investigation report, the accident occurred while the deminer was ...