Add to ORKGThe accident occurred because of carelessness of the deminer as he used chisel directly on the detected signal instead of [Demining group] standard excavating tool (scraper). The poor command and control is another contributing factor for this accident as he was not stopped by command group
Carelessness of deminer and poor supervision in terms of not conducted QC, caused the accident, and ...
The accident has occurred because of error made by the involved deminer as he wanted to remove a pie...
The primary cause of this accident is listed as a Field Control Inadequacy because the investigators...
The accident occurred because of carelessness of the deminer as he used chisel directly on the detec...
The investigation team concluded that the contributing factor to this accident was carelessness of d...
The accident has occurred because of error made by the involved deminer as he used chisel directly o...
The accident occurred whilst the deminer was excavating on a detector reading; the deminer failed to...
The negligence of deminer in terms of not adhering to set procedure for excavation and the failure o...
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was wo...
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was wo...
The primary cause of this accident is listed as Inadequate training because the investigators found ...
The primary cause of this accident is listed as a Field Control inadequacy because the investigators...
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was wo...
The primary cause of this accident is listed as a Field Control inadequacy because the investigators...
It is the conclusion of the investigation team that the involved deminer did not properly find the c...
Carelessness of deminer and poor supervision in terms of not conducted QC, caused the accident, and ...
The accident has occurred because of error made by the involved deminer as he wanted to remove a pie...
The primary cause of this accident is listed as a Field Control Inadequacy because the investigators...
The accident occurred because of carelessness of the deminer as he used chisel directly on the detec...
The investigation team concluded that the contributing factor to this accident was carelessness of d...
The accident has occurred because of error made by the involved deminer as he used chisel directly o...
The accident occurred whilst the deminer was excavating on a detector reading; the deminer failed to...
The negligence of deminer in terms of not adhering to set procedure for excavation and the failure o...
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was wo...
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was wo...
The primary cause of this accident is listed as Inadequate training because the investigators found ...
The primary cause of this accident is listed as a Field Control inadequacy because the investigators...
The primary cause of this accident is listed as a Field Control Inadequacy because the Victim was wo...
The primary cause of this accident is listed as a Field Control inadequacy because the investigators...
It is the conclusion of the investigation team that the involved deminer did not properly find the c...
Carelessness of deminer and poor supervision in terms of not conducted QC, caused the accident, and ...
The accident has occurred because of error made by the involved deminer as he wanted to remove a pie...
The primary cause of this accident is listed as a Field Control Inadequacy because the investigators...