Solar Heat in Industrial Processes : Integration of Parabolic Trough Solar Collectors Dairy Plants and Pharmaceutical Plants

The industry sector accounts for a high share of the final energy consumption, with industries in EU-28accounting for a quarter of the final energy demand. Studies also show that 45 % of the industrial heatdemand in EU-27 is in a temperature range that can be supplied with present day solar collectors. Despitethis large potential, solar heat faces obstacles hindering its growth in the industrial sector. The mostsignificant obstacle is the low insight of the industrial system designs and energy demands. Those arecrucial factors for the feasibility and dimensioning of solar heating systems. Three case studies aretherefore conducted in dairy and pharmaceutical plants in order to review the most promising integrationpoints for parabolic trough solar collectors in terms of annual heat demand, temperature level andintegration effort. Two case studies are performed in dairy plants and one in a pharmaceutical plant, alllocated in Sweden. The analyses comprised reviewing energy mappings, process and instrumentationdiagrams of processes and boiler systems, and hourly energy demand data. Simulations have beencarried out with Polysun for the processes with hourly energy data available.Four integration points have been determined to be high priority solar heat integration points in dairyplants, when considering annual thermal energy demand, temperature levels and integration effort.Those are the low pressure steam line, heating of feedwater, clean in place systems and pasteurizers.Solar heat integration concepts have been presented for all the aforementioned heat sinks andsimulations have been conducted for the low pressure steam line and heating of feedwater. A significantamount of excess heat is produced as a result of fluctuating heat demands and peak solar heat productionhours. Further investigation should be carried out, in order to review the potential of supplying excessheat to other heat sinks. Despite the reviewed potential of the clean in place systems and pasteurizers,lack of the hourly energy demand has hindered further analyses of those systems. It is thereforerecommended to conduct energy measurements before taking further measures.Two integration points have been identified in the pharmaceutical plant, namely autoclaves andmultiple-effect distillers. Solar steam generation concepts have been presented for both processes. Theautoclaves are provided with 4,5 bar steam intermittently, as they work with batches and can have ondutyand off-duty intervals ranging from 3-30 minutes. The multiple-effect distillers are providedwith 7 bar steam, which is of rather high pressure for the solar collectors model on which thesimulations are based. The heat demand of the distillers is more or less constant.It was generally easier to acquire data for the integration points at the supply level. For instance, all heatsinks at the supply level had energy demand data available, contrary to the process level. This inclinesadditional focus on integration to the supply level, if the extent of the feasibility study is to be kept to aminimum