The transition of Fe2+ to Fe3+ in Fricke solution after irradiation results in a change of NMR proton relaxation times in agarose gels which can be used for the dosimetry of ionizing radiation. The main advantage of this system is the possibility of observing dose distributions in 3 dimensions in a medium which is supposed to be tissue equivalent. The aim of the study was to quantify parameters which determine the tissue equivalence of NMR dosimetry gels. Electron densities and effective atomic numbers were calculated for gels with varying iron, sulphur and agarose concentration. The Hounsfield CT numbers so derived agree well with the CT numbers measured on a clinical CT scanner (effective photon energy 70.7 keV).</p
Neutron capture therapy (NCT) is based on the localised release of energy in tumours from appropriat...
Gel dosimetry was developed in the 1990s in response to a growing need for methods to validate the r...
Dynamically delivered intensity modulated beams (IMBs) pose unique verification problems that may be...
The transition of Fe2+ to Fe3+ in Fricke solution after irradiation results in a change of NMR proto...
The conversion of Fe2+ to Fe3+ in a Fricke solution due to ionizing radiation can be detected using ...
The use of radiation sensitive gels for dosimetry measurements was first suggested in the 1950s. It ...
Ferrous sulphate gel analysed by relaxation time measurements with NMR imaging is considered a usefu...
Two gels have been found to be suitable to load with ferrous sulphate solution. In these soft tissue...
Note:In the past ten years, three dimensional radiation dosimetry techniques based on the dose respo...
Fricke Xylenol Gel (FXG) dosimetric system is based on the radiation induced oxidation of ferrous (F...
The measurement of absorbed dose distributions using dosemeter gel and magnetic resonance imaging (M...
Ferrous sulphate gel dosimetry has the potential for measurement of absorbed dose distributions in p...
This work describes the characterization of various Fricke-Agarose-Xylenol gels (FXG) dosimeters usi...
Introduction: Fricke Xylenol Gel (FXG) dosimetric system is based on the radiation induced oxidation...
Fricke Xylenol Gel (FXG) dosimetric system is based on the radiation induced oxidation of ferrous (F...
Neutron capture therapy (NCT) is based on the localised release of energy in tumours from appropriat...
Gel dosimetry was developed in the 1990s in response to a growing need for methods to validate the r...
Dynamically delivered intensity modulated beams (IMBs) pose unique verification problems that may be...
The transition of Fe2+ to Fe3+ in Fricke solution after irradiation results in a change of NMR proto...
The conversion of Fe2+ to Fe3+ in a Fricke solution due to ionizing radiation can be detected using ...
The use of radiation sensitive gels for dosimetry measurements was first suggested in the 1950s. It ...
Ferrous sulphate gel analysed by relaxation time measurements with NMR imaging is considered a usefu...
Two gels have been found to be suitable to load with ferrous sulphate solution. In these soft tissue...
Note:In the past ten years, three dimensional radiation dosimetry techniques based on the dose respo...
Fricke Xylenol Gel (FXG) dosimetric system is based on the radiation induced oxidation of ferrous (F...
The measurement of absorbed dose distributions using dosemeter gel and magnetic resonance imaging (M...
Ferrous sulphate gel dosimetry has the potential for measurement of absorbed dose distributions in p...
This work describes the characterization of various Fricke-Agarose-Xylenol gels (FXG) dosimeters usi...
Introduction: Fricke Xylenol Gel (FXG) dosimetric system is based on the radiation induced oxidation...
Fricke Xylenol Gel (FXG) dosimetric system is based on the radiation induced oxidation of ferrous (F...
Neutron capture therapy (NCT) is based on the localised release of energy in tumours from appropriat...
Gel dosimetry was developed in the 1990s in response to a growing need for methods to validate the r...
Dynamically delivered intensity modulated beams (IMBs) pose unique verification problems that may be...