Surface roughness effects on runoff and soil erosion rates under simulated rainfall

Soil surface roughness is identified as one of the controlling factors governing runoff and soil loss. Yet, most studies pay little attention to soil surface roughness. In this study, we analyzed the influence of surface roughness on runoff and soil erosion rates. Bulk samples of a silt loam soil were collected and sieved to 4 aggregate sizes: 0.003-0.012, 0.012-0.02, 0.02-0.045, 0.045-0.1 m. The aggregates were packed in a 0.60 by 1.2 m soil tray, which was set at a slope of 5%. Rainfall simulations using an oscillating nozzle simulator were executed for 90 min at intensity of 50.2 mm.h-1. The surface microtopography was digitized by an instantaneous profile laser scanner before and after the rainfall application. From the laser scanner data, a digital elevation model was produced and a roughness factor extracted. The data revealed longer times to runoff with increasing soil surface roughness as surface depressions first had to be filled before runoff could take place. Once channels were interconnected, runoff velocity and runoff amount increased as aggregates were broken down and depressions were filled. Rough surfaces were smoothed throughout the rainfall event, diminishing the effect on runoff. Final wash rates were comparable for all different applications. The simulations reveal that the significance of soil surface roughness effect is the delay in runoff for rougher surfaces rather than the decrease of soil erosion amount