Among decentralized small-scale biomass energy sources with the potential to revitalize local communities, combined heat and power (CHP) from gasification is promising in terms of its high power generation efficiency. Still, it has yet to achieve operational stability, in part due to the variation in the moisture content of the woodchips used as fuel. In this study, a technical and economic evaluation was performed to establish a center for the efficient production of high-quality dry woodchips within a sawmill and to determine the technical characteristics and economic viability of a system using gasification CHP, wood waste-fired boilers or an organic Rankine cycle (ORC) as heat sources. The results showed that the net present values (NPV...
AbstractThe pros and cons of various types of biomass dryers have been documented in this paper. Usi...
In the published literature, there is a lack of detailed data relevant to full-scale gasification pl...
Exploitation of low and medium temperature thermal sources, in particular those based on biomass com...
This study focused on small gasification units for combined heat and power generation (CHP) up to 20...
AbstractThe global demand for renewable energy in the last years is facing innovations like the co-g...
20% of the Finnish district heating (DH) power plant fuels are wood-based and the share is increasin...
Biomass combined heat and power (CHP) generation is the more efficient use of biomass compared the d...
In remote areas, such as India, Africa and Southeast Asia, typically not connected to the natural ga...
This aim of this dissertation is to investigate the feasibility of biomass-based CHP generation at a...
Biomass is one of the most versatile sustainable energy sources. This versatility allows utilization...
Wood processing is a typical example of an industry where mechanical work (machining) and heat energ...
This study investigates heat integrated production of FT (Fischer-Tropsch) crude, where excess heat ...
Many parts of the World have remained underdeveloped due to the lack of access to electricity. Devel...
Wood-fired Combined Heat and Power (CHP) plants connected to District Heating (DH) networks can repr...
The objective of this work was to design a heat integrated, cost-effective, and cleaner combined hea...
AbstractThe pros and cons of various types of biomass dryers have been documented in this paper. Usi...
In the published literature, there is a lack of detailed data relevant to full-scale gasification pl...
Exploitation of low and medium temperature thermal sources, in particular those based on biomass com...
This study focused on small gasification units for combined heat and power generation (CHP) up to 20...
AbstractThe global demand for renewable energy in the last years is facing innovations like the co-g...
20% of the Finnish district heating (DH) power plant fuels are wood-based and the share is increasin...
Biomass combined heat and power (CHP) generation is the more efficient use of biomass compared the d...
In remote areas, such as India, Africa and Southeast Asia, typically not connected to the natural ga...
This aim of this dissertation is to investigate the feasibility of biomass-based CHP generation at a...
Biomass is one of the most versatile sustainable energy sources. This versatility allows utilization...
Wood processing is a typical example of an industry where mechanical work (machining) and heat energ...
This study investigates heat integrated production of FT (Fischer-Tropsch) crude, where excess heat ...
Many parts of the World have remained underdeveloped due to the lack of access to electricity. Devel...
Wood-fired Combined Heat and Power (CHP) plants connected to District Heating (DH) networks can repr...
The objective of this work was to design a heat integrated, cost-effective, and cleaner combined hea...
AbstractThe pros and cons of various types of biomass dryers have been documented in this paper. Usi...
In the published literature, there is a lack of detailed data relevant to full-scale gasification pl...
Exploitation of low and medium temperature thermal sources, in particular those based on biomass com...