Techno-Economic and Environmental Evaluation of Biomass Dryer

AbstractThe pros and cons of various types of biomass dryers have been documented in this paper. Using dry biomass significantly reduces the cost of handling, transportation and pyrolysis. The main choices for drying biomass are rotary dryers, flash dryers, stationery bed dryers and fluidised bed dryers. The drying medium can be hot air, hot air mixed with steam, and/or superheated steam. A typical example for wood chip drying using a financial model is described, including the environmental performance. The energy requirements and greenhouse gas emissions have been estimated for drying biomass. From this study, it is evident that increasing temperature will decrease drying time and increase throughput but not necessarily decrease the drying cost. This is due to higher energy use and higher cost of capital inputs such as loading/unloading and heat plant. Thus, low drying temperature can be used if throughput is not a key issue for an operation. The global warming potential of the biomass drying process 9.2kg CO2-e/t of oven-dry biomass. This assumes that wood waste is used as fuel and drying is on a moving belt dryer. If this dry biomass is used in a power station as fuel for steam boiler, there is a significant reduction potential of CO2 emission from a typical black coal-fired power plant due to fuel switching. This assumes that trees are planted to produce this biomass sustainably. Environmental impacts of any dryer type should be considered for selection in addition to its traditional techno-economic performance