Add to ORKGDespite wave set up onshore low crested breakwaters may reveal quite important for the functional design of these structures, the experimental studies on this topic are up to now extremely limited, especially under random wave attacks. This contribution discusses results of large scale model tests the Authors conducted at the Grosser WellenKanal (GWK) of Hannover, Germany on an idealized 2D model of low crested/submerged breakwater. Analysis showed the importance of momentum release of breaking waves for submerged breakwaters and of the mass balance for low crested one
In recent years the hydraulic performance of low-crested structures has been widely studied both the...
Objective of this paper is to analyse flow patterns and velocity fields around rubble mound low-cres...
In recent years the hydraulic performance of low-crested structures has been widely studied both the...
Despite wave set up onshore low crested breakwaters may reveal quite important for the functional d...
Despite wave set up onshore low crested breakwaters may reveal quite important for the functional de...
Functional design of low crested breakwaters requires an accurate prediction of wave transmission in...
The paper presents results of 3D laboratory experiments on low-crested breakwaters. Two typical stru...
The paper in-depth describes the experimental set-up and the results obtained by some physical mode...
In addition to reducing the incoming wave energy, submerged breakwaters also cause a setup of the se...
In addition to reducing the incoming wave energy, submerged breakwaters also cause a setup of the se...
The research reported advances design methods for low crest and submerged breakwaters. This report r...
This paper deals with model tests conducted at the Delft Hydraulics Laboratory (DHL) and the River a...
In addition to reducing the incoming wave energy, submerged breakwaters also cause a setup of the se...
Recently a submerged breakwater has been considered to be suitable as a protective construction for ...
In the present study, the flow induced by waves around a physical model of a detached low crested ru...
In recent years the hydraulic performance of low-crested structures has been widely studied both the...
Objective of this paper is to analyse flow patterns and velocity fields around rubble mound low-cres...
In recent years the hydraulic performance of low-crested structures has been widely studied both the...
Despite wave set up onshore low crested breakwaters may reveal quite important for the functional d...
Despite wave set up onshore low crested breakwaters may reveal quite important for the functional de...
Functional design of low crested breakwaters requires an accurate prediction of wave transmission in...
The paper presents results of 3D laboratory experiments on low-crested breakwaters. Two typical stru...
The paper in-depth describes the experimental set-up and the results obtained by some physical mode...
In addition to reducing the incoming wave energy, submerged breakwaters also cause a setup of the se...
In addition to reducing the incoming wave energy, submerged breakwaters also cause a setup of the se...
The research reported advances design methods for low crest and submerged breakwaters. This report r...
This paper deals with model tests conducted at the Delft Hydraulics Laboratory (DHL) and the River a...
In addition to reducing the incoming wave energy, submerged breakwaters also cause a setup of the se...
Recently a submerged breakwater has been considered to be suitable as a protective construction for ...
In the present study, the flow induced by waves around a physical model of a detached low crested ru...
In recent years the hydraulic performance of low-crested structures has been widely studied both the...
Objective of this paper is to analyse flow patterns and velocity fields around rubble mound low-cres...
In recent years the hydraulic performance of low-crested structures has been widely studied both the...