RF Power Performance Evaluation of Surface Channel Diamond MESFET

We experimentally investigate the large-signal radio frequency performances of surface-channel p-type diamond MESFETs fabricated on hydrogenated polycrystalline diamond. The devices under examination have a coplanar layout with two gate fingers, total gate periphery of 100 lm; in DC they exhibit a hole accumulation behavior with threshold voltage V t 0–0.5 V and maximum drain current density of 120 mA/mm. The best small-signal radio frequency performances (maximum cutoff or transition fre- quency f T and oscillation frequency f max ) were obtained close to the threshold and were of the order of 6 and 15 GHz, respectively. The power radio frequency response was characterized by driving the devices in class A at an operating frequency of 2 GHz and identifying through the active load-pull technique the optimum load for maximum power added efficiency. A power gain in linearity of 8 dB and an output power of approximately 0.2 W/mm with 22% power added efficiency were obtained on the optimum load impedance at a bias point V DS = 14 V, V GS = 1 V. To the best of our knowledge, these are the first large signal measurements ever reported for surface MESFET on polycrystalline diamond, and show the poten- tial of such technology for the development of microwave power devices