HoloLens 2 for Maxillofacial Surgery: A Preliminary Study

Since custom-made 3D printed surgical guides for maxillofacial surgery are usually expensive, Augmented Reality (AR) can be efficiently employed to overcome the high costs. The proposed work aims to develop and test an AR application for different maxillofacial surgeries. The application consists in overlaying the cutting lines on the patient’s mandible to guide the clinician during the procedure. It has been realized in Unity and preliminary tested with HoloLens 2 and a 3D printed mandible. Seven participants performed two consecutive trials. The mandible with the obtained surgical lines has been scanned after each test to digitally reconstruct the traced lines and compare them with the surgical lines previously designed. The results allowed the preliminary analysis of the developed AR system’s accuracy and precision. Mean distances from the designed surgical guides showed good accuracy for the genioplasty (deviation error around 1.03 mm) and orthognathic surgery (deviation error around 1.27 mm), suggesting the applicability of HoloLens 2 for these kinds of surgery. On the contrary, the application was not suitable for the mandibular angle osteotomy (deviation error over 2.50 mm)