This paper presents methods of modifying the anode surface layers of Al2O3 by introducing carbon to their rnicrostructure. Composite coatings were prepared using two different methods. In the first, coatings were formed by means of oxidation under constant current conditions. Anodic oxidation of aluminium was conducted in a multicomponent electrolyte with the addition of organic acids and graphite. The second method was based on the formation of oxide coatings in an electrolyte without the addition of graphite or heat treatment of the layers of succinic acid. The obtained coatings were tested using SEM, TEM, and GDOES (glow discharge optical emission spectrometry) and their tribological and stereometric properties were measured. The study d...
Anodization of aluminum alloys is a common surface treatment procedure employed for the protection a...
Coatings, with a thickness of up to 75 µm, were formed by plasma electrolytic oxidation (PEO) ...
The article presents the dependence of the morphology as well as micromechanical and sclerometric pr...
This paper presents methods of modifying the anode surface layers of Al2O3 by introducing carbon to ...
W artykule przedstawiono tribologiczne i stereometryczne właściwości powłok tlenku aluminium modyfik...
The article presents the effect of the anodizing parameters, as well as the thermo-chemical treatmen...
The paper presents the mechanical properties of composite aluminium oxide-graphite surface layers. T...
The paper presents a study on corrosion behaviour and tribological properties of nickel composite co...
The paper presents the properties of surface oxide layers with an increased content of carbon for tr...
The paper presents a new method for modelling oxide layers for tribology related needs. The most rec...
In this paper, a new composite coating was prepared on the surface of pure aluminum (Al) by combinin...
W pracy przedstawiono właściwości tribologiczne tlenkowych warstw powierzchniowych Al2O3 na stopie a...
This review proposes to carry out a state-of-the-art associated with micro-arc oxidation. Firstly, t...
A ceramic coating on AA6082 aluminum alloy prepared by plasma electrolytic oxidation (PEO) has been ...
Composite oxide films containing graphite were fabricated using the anodizing technique on AA2017- T...
Anodization of aluminum alloys is a common surface treatment procedure employed for the protection a...
Coatings, with a thickness of up to 75 µm, were formed by plasma electrolytic oxidation (PEO) ...
The article presents the dependence of the morphology as well as micromechanical and sclerometric pr...
This paper presents methods of modifying the anode surface layers of Al2O3 by introducing carbon to ...
W artykule przedstawiono tribologiczne i stereometryczne właściwości powłok tlenku aluminium modyfik...
The article presents the effect of the anodizing parameters, as well as the thermo-chemical treatmen...
The paper presents the mechanical properties of composite aluminium oxide-graphite surface layers. T...
The paper presents a study on corrosion behaviour and tribological properties of nickel composite co...
The paper presents the properties of surface oxide layers with an increased content of carbon for tr...
The paper presents a new method for modelling oxide layers for tribology related needs. The most rec...
In this paper, a new composite coating was prepared on the surface of pure aluminum (Al) by combinin...
W pracy przedstawiono właściwości tribologiczne tlenkowych warstw powierzchniowych Al2O3 na stopie a...
This review proposes to carry out a state-of-the-art associated with micro-arc oxidation. Firstly, t...
A ceramic coating on AA6082 aluminum alloy prepared by plasma electrolytic oxidation (PEO) has been ...
Composite oxide films containing graphite were fabricated using the anodizing technique on AA2017- T...
Anodization of aluminum alloys is a common surface treatment procedure employed for the protection a...
Coatings, with a thickness of up to 75 µm, were formed by plasma electrolytic oxidation (PEO) ...
The article presents the dependence of the morphology as well as micromechanical and sclerometric pr...