The use of two cored wire injection methods (2PE- 9) and the unique application of a drum ladle as a treatment, transport and casting one, instead of a vertical treatment ladle are presented. Optimization parameters, like: length of nodulariser wire, treatment and pouring temperature have been shown. The influence of various treatment temperatures on magnesium recovery is demonstrated. The typical microstructure, mechanical properties and cost calculation of the ferritic ductile cast iron (type SiMo - EN-GJS-SiMo40-6 Grade) production according to EN 16124:2011 (E) are presented. Injection of two Ø 9 mm as well wires; cored in FeSi + Mg nodulariser mixture and inoculant master alloy into a drum ladle is a treatment method that can be used f...
The results of studies on the use of magnesium alloy in modern Tundish + Cored Wire injection method...
V teoretické části této práce jsou blíže popsány metody výroby tvárné litiny, praktická doporučení t...
Cílem této práce je popsat změnu technologie modifikace ve slévárně litiny s kuličkovým grafitem. Pů...
The use of two cored wire injection methods (2PE- 9) and the unique application of a drum ladle as a...
Below are described results of the analysis concerning the use of two cored wire injection method (2...
The results of studies on the use of modern two cored wires injection method for production of ferri...
The results of studies on the use of modern two cored wires injection method for production of nodul...
© 2019, "Ore and Metals" Publishing house. All rights reserved. The features of ladle modification o...
Dodatak sferoidizacijskih (nodularizacijskih) elemenata u rastaljeno željezo vjerojatno je najvažn...
Ductile iron was first developed in 1943 and it is widely used in automotive industry.The difference...
Diplomová práce se zabývá optimalizací technologie výroby litiny s kuličkovým grafitem modifikací pl...
Obsah diplomové práce je zaměřen na výrobu tvárné litiny ve společnosti KASI, spol. s r. o. (dále je...
Nodular gray cast iron having properties superior to conventional gray cast iron can be produced by ...
The objectives of this research is to study and understand the nodulizing of ductile iron using in-l...
The results of studies on the use of magnesium alloy in modern Tundish + Cored Wire injection method...
The results of studies on the use of magnesium alloy in modern Tundish + Cored Wire injection method...
V teoretické části této práce jsou blíže popsány metody výroby tvárné litiny, praktická doporučení t...
Cílem této práce je popsat změnu technologie modifikace ve slévárně litiny s kuličkovým grafitem. Pů...
The use of two cored wire injection methods (2PE- 9) and the unique application of a drum ladle as a...
Below are described results of the analysis concerning the use of two cored wire injection method (2...
The results of studies on the use of modern two cored wires injection method for production of ferri...
The results of studies on the use of modern two cored wires injection method for production of nodul...
© 2019, "Ore and Metals" Publishing house. All rights reserved. The features of ladle modification o...
Dodatak sferoidizacijskih (nodularizacijskih) elemenata u rastaljeno željezo vjerojatno je najvažn...
Ductile iron was first developed in 1943 and it is widely used in automotive industry.The difference...
Diplomová práce se zabývá optimalizací technologie výroby litiny s kuličkovým grafitem modifikací pl...
Obsah diplomové práce je zaměřen na výrobu tvárné litiny ve společnosti KASI, spol. s r. o. (dále je...
Nodular gray cast iron having properties superior to conventional gray cast iron can be produced by ...
The objectives of this research is to study and understand the nodulizing of ductile iron using in-l...
The results of studies on the use of magnesium alloy in modern Tundish + Cored Wire injection method...
The results of studies on the use of magnesium alloy in modern Tundish + Cored Wire injection method...
V teoretické části této práce jsou blíže popsány metody výroby tvárné litiny, praktická doporučení t...
Cílem této práce je popsat změnu technologie modifikace ve slévárně litiny s kuličkovým grafitem. Pů...