Treatments of a Surface Ion Trap: A Study of Electric-Field Noise near a Contaminated Metal Surface

All surfaces generate electric-field noise, yet the physical origins of this noise are not well understood. This has been an active area of research in the ion trapping community for the past two decades, as ions are highly sensitive to electric-field fluctuations. With our work, we aim to illuminate the microscopic processes that drive charge dynamics on metal surfaces, so as to enable the engineering of low noise quantum devices. We use single trapped calcium ions as detectors to study the 1/f noise generated by the surfaces of ion traps. We the study this noise by observing how it responds to changes in the properties of the trap surface. The surface properties are altered using treatments including prolonged heating, argon ion milling, and electron bombardment. In situ characterization tools are used to monitor the effects of these treatments. Our measurements are consistent with noise produced by an ensemble of thermally activated fluctuators, so our data is discussed in this context. In this dissertation, we present results from a lengthy series of surface treatment experiments, the majority of which took place on a single aluminum-copper substrate. The results of these experiments indicate that argon ion milling can lower noise both by removing contaminants and by altering the morphology of the trap surface. The effects of morphology are isolated from the effects of contaminant removal via heat treatments, which alter the structure of the surface without changing its chemical composition. Through electron bombardment experiments, we begin an exploration of the relationship between hydrocarbon adsorbate structure and electric-field noise. In addition, we compare the noise characteristics of a set of similarly fabricated traps, and determine that atmosphere exposure has a major impact on noise produced by aluminum-copper films.These experiments establish links between the electric-field noise characteristics and the microscopic properties of a contaminated metal trap surface. The insights we draw in this work can inform the next generation of ion trap engineering, storage, and treatment