Add to ORKG"Report of an investigation conducted by the Engineering Experiment Station and the Department of Mining, Metallurgy, and Petroleum Engineering of the University of Illinois in cooperation with the Department of Army Ordinance Corps."Bibliography: p. 40
The briquett-samples containing Fe_2O_3. SiO_2 and CaO were heated at 1, 200℃ and 1, 300℃ in the atm...
Iron and steel powder grades are extensively used in the powder metallurgy (PM) industry for manufac...
An experimental apparatus, a modification of the Linder\u27s apparatus, was designed and constructed...
In this paper, the effect of processes occurring during the sintering of four powder metallurgy stee...
The effect of heat treatment on the microstructure, hardness and density of sintered (1129°C, 45 min...
The article presents experimental results on the application of thermal oxidation or low temperature...
This paper investigates the use of shop-floor ferrous scrap that contains iron ore as a raw material...
This paper investigates the use of shop-floor ferrous scrap that contains iron ore as a raw material...
The properties of the sintered product of metallic powder are controlled by the physical, chemical a...
Various types of iron powder are extensively used in the powder metallurgy (PM) industry. Water-atom...
Contribución en: VII Congreso Nacional de Propiedades Mecánicas de Sólidos, Segovia, 27-30 de junio ...
The sintering process is a thermal agglomeration process, and it is accompanied by chemical reaction...
The properties of powder metallurgical, PM, components are dependent on that the dilemma of full den...
Successful removal of the surface oxides, present on the powder particle surface, during initial sta...
The present paper deals with the evaluation of different vacuum heat treatments on the microstructur...
The briquett-samples containing Fe_2O_3. SiO_2 and CaO were heated at 1, 200℃ and 1, 300℃ in the atm...
Iron and steel powder grades are extensively used in the powder metallurgy (PM) industry for manufac...
An experimental apparatus, a modification of the Linder\u27s apparatus, was designed and constructed...
In this paper, the effect of processes occurring during the sintering of four powder metallurgy stee...
The effect of heat treatment on the microstructure, hardness and density of sintered (1129°C, 45 min...
The article presents experimental results on the application of thermal oxidation or low temperature...
This paper investigates the use of shop-floor ferrous scrap that contains iron ore as a raw material...
This paper investigates the use of shop-floor ferrous scrap that contains iron ore as a raw material...
The properties of the sintered product of metallic powder are controlled by the physical, chemical a...
Various types of iron powder are extensively used in the powder metallurgy (PM) industry. Water-atom...
Contribución en: VII Congreso Nacional de Propiedades Mecánicas de Sólidos, Segovia, 27-30 de junio ...
The sintering process is a thermal agglomeration process, and it is accompanied by chemical reaction...
The properties of powder metallurgical, PM, components are dependent on that the dilemma of full den...
Successful removal of the surface oxides, present on the powder particle surface, during initial sta...
The present paper deals with the evaluation of different vacuum heat treatments on the microstructur...
The briquett-samples containing Fe_2O_3. SiO_2 and CaO were heated at 1, 200℃ and 1, 300℃ in the atm...
Iron and steel powder grades are extensively used in the powder metallurgy (PM) industry for manufac...
An experimental apparatus, a modification of the Linder\u27s apparatus, was designed and constructed...