Examples for stress-strain curves of PSI, PSICYS and PSIDAB samples (black arrow indicates the tearing point of PSIDAB) (a), examples for force-displacement curves obtained in single interrupted suture model tests (b); ultimate tensile strengths (c), maximum bearing loads (d, e) of the samples; sutured PSIDAB sample (f), rolled up PSIDAB sample for e.g., laparoscopy (g). “+” means significant (p = 0.05) from PSI and “o” means significant difference from PSICYS.</p
<p>Each box shows the 25<sup>th</sup> to 75<sup>th</sup> percentile of the measured bending stress. ...
(A) A tensile test machine with an inset showing a gripped specimen. (B) A relationship curve betwee...
Stress-strain curves obtained by performing compression tests. The bold curves correspond to the ave...
For each specimen, the load-displacment curves are plotted under the different testing conditions (f...
<p>Load-displacement curve from the biomechanical testing of a vertebra (ID: OPS004_1). FL was defin...
<p>Engineering stress-strain curves from experiments and ABAQUS/Standard numerical simulations for (...
Numbers represent the macroscopic group; letters A and B represent the sample groups (posterior and ...
<p>Stress/Strain curves produced from tensile measurement of hand-pulled fibers. A, Sp1R8 only; B, S...
<p>(A) force-displacement curve obtained on a hard substrate surface (B) force-displacement curve ob...
<p>Engineering stress-strain curves from experiments and ABAQUS/Explicit numerical simulations for (...
<p>Comparisons of principal strains in models without (black squares) and with (white squares) sutur...
<p>The monoaxial ARD demonstrated the highest compressive stiffness, whereas the standard ARD had th...
<p>Examples of pressure-stretch curves obtained from control (A) and 21d HySu (B) PAs.</p
<p>(A) Raw stress-strain data (thin dotted lines) and average (thick solid line) for the perilimbal ...
Maximum strength values for the different groups in newtons (N), recorded at the different study tim...
<p>Each box shows the 25<sup>th</sup> to 75<sup>th</sup> percentile of the measured bending stress. ...
(A) A tensile test machine with an inset showing a gripped specimen. (B) A relationship curve betwee...
Stress-strain curves obtained by performing compression tests. The bold curves correspond to the ave...
For each specimen, the load-displacment curves are plotted under the different testing conditions (f...
<p>Load-displacement curve from the biomechanical testing of a vertebra (ID: OPS004_1). FL was defin...
<p>Engineering stress-strain curves from experiments and ABAQUS/Standard numerical simulations for (...
Numbers represent the macroscopic group; letters A and B represent the sample groups (posterior and ...
<p>Stress/Strain curves produced from tensile measurement of hand-pulled fibers. A, Sp1R8 only; B, S...
<p>(A) force-displacement curve obtained on a hard substrate surface (B) force-displacement curve ob...
<p>Engineering stress-strain curves from experiments and ABAQUS/Explicit numerical simulations for (...
<p>Comparisons of principal strains in models without (black squares) and with (white squares) sutur...
<p>The monoaxial ARD demonstrated the highest compressive stiffness, whereas the standard ARD had th...
<p>Examples of pressure-stretch curves obtained from control (A) and 21d HySu (B) PAs.</p
<p>(A) Raw stress-strain data (thin dotted lines) and average (thick solid line) for the perilimbal ...
Maximum strength values for the different groups in newtons (N), recorded at the different study tim...
<p>Each box shows the 25<sup>th</sup> to 75<sup>th</sup> percentile of the measured bending stress. ...
(A) A tensile test machine with an inset showing a gripped specimen. (B) A relationship curve betwee...
Stress-strain curves obtained by performing compression tests. The bold curves correspond to the ave...