Add to ORKGThe Mars Rover Laser Scanning system uses a precision laser pointing mechanism, a photodetector array, and the concept of triangulation to perform three dimensional scene analysis. The system is used for real time terrain sensing and vision. The Multi-Laser/Multi-Detector laser scanning system is controlled by a digital device called the ML/MD controller. A next generation laser scanning system, based on the Level 2 controller, is microprocessor based. The new controller capabilities far exceed those of the ML/MD device. The first draft circuit details and general software structure are presented
The functional requirements and the configuration of the data base management system are described. ...
The baseline products, schedules, and resource requirements for the Mission Planning and Analysis Di...
Pressure sensors, blood flow transducers, pH electrodes, and photographic recording of biological da...
A three-person capacity preprototype vapor compression distillation subsystem for recovering potable...
A nitrogen supply subsystem based on the dissociation of hydrazine into a mixture of hydrogen and ni...
The performance of Bosch hardware at the subsystem level (up to five-person capacity) in terms of fi...
The level C requirements for the shuttle orbiter terminal area energy management (TAEM) guidance and...
Influence of bandwidth restriction on signal to noise performance of modulated PCM/NRZ signa
A research and development program was successfully completed towards the development of a method of...
The computer code for the trajectory processor (#TRAJ) of the high fidelity relative motion program ...
Engineering and performance of warm gas mass expulsion system for attitude control on long space voy...
An algorithm for using electric currents to control pendular oscillations induced by various perturb...
A software package was designed and written to process in real-time any one quadrature channel pair ...
Utilization in the development of multi-kW low orbit power systems is discussed. The following techn...
A physiological date telemetry system, consisting basically of a portable unit and a ground base sta...
The functional requirements and the configuration of the data base management system are described. ...
The baseline products, schedules, and resource requirements for the Mission Planning and Analysis Di...
Pressure sensors, blood flow transducers, pH electrodes, and photographic recording of biological da...
A three-person capacity preprototype vapor compression distillation subsystem for recovering potable...
A nitrogen supply subsystem based on the dissociation of hydrazine into a mixture of hydrogen and ni...
The performance of Bosch hardware at the subsystem level (up to five-person capacity) in terms of fi...
The level C requirements for the shuttle orbiter terminal area energy management (TAEM) guidance and...
Influence of bandwidth restriction on signal to noise performance of modulated PCM/NRZ signa
A research and development program was successfully completed towards the development of a method of...
The computer code for the trajectory processor (#TRAJ) of the high fidelity relative motion program ...
Engineering and performance of warm gas mass expulsion system for attitude control on long space voy...
An algorithm for using electric currents to control pendular oscillations induced by various perturb...
A software package was designed and written to process in real-time any one quadrature channel pair ...
Utilization in the development of multi-kW low orbit power systems is discussed. The following techn...
A physiological date telemetry system, consisting basically of a portable unit and a ground base sta...
The functional requirements and the configuration of the data base management system are described. ...
The baseline products, schedules, and resource requirements for the Mission Planning and Analysis Di...
Pressure sensors, blood flow transducers, pH electrodes, and photographic recording of biological da...