Add to ORKGThe functional requirements and the configuration of the data base management system are described. Techniques and technology which will enable more efficient and timely transfer of useful data from the sensor to the user, extraction of information by the user, and exchange of information among the users are demonstrated
A three-person capacity preprototype vapor compression distillation subsystem for recovering potable...
The FORTRAN computer program RAWINPROC accepts output from NASA Wallops computer program METPASS1; a...
Pressure sensors, blood flow transducers, pH electrodes, and photographic recording of biological da...
The software utilized for image correction accuracy measurement is described. The correlation analys...
The performance of Bosch hardware at the subsystem level (up to five-person capacity) in terms of fi...
The computer code for the trajectory processor (#TRAJ) of the high fidelity relative motion program ...
A research and development program was successfully completed towards the development of a method of...
A conceptual design study was conducted to devise and evaluate techniques for the external vaporizat...
The results of an effort to plan a final verification wind tunnel test to validate the recommended c...
An algorithm for using electric currents to control pendular oscillations induced by various perturb...
Utilization in the development of multi-kW low orbit power systems is discussed. The following techn...
A data link system used on a prototype autonomous roving vehicle is described. This system provides ...
The System Design Document for the TOMS (Total Mapping Spectrometer) Near Realtime System provides d...
An 0.8 percent fuel savings was achieved by a reduction in engine bleed air through the use of cabin...
General criteria for design of equipment and facilities to be used at Kennedy Space Cente
A three-person capacity preprototype vapor compression distillation subsystem for recovering potable...
The FORTRAN computer program RAWINPROC accepts output from NASA Wallops computer program METPASS1; a...
Pressure sensors, blood flow transducers, pH electrodes, and photographic recording of biological da...
The software utilized for image correction accuracy measurement is described. The correlation analys...
The performance of Bosch hardware at the subsystem level (up to five-person capacity) in terms of fi...
The computer code for the trajectory processor (#TRAJ) of the high fidelity relative motion program ...
A research and development program was successfully completed towards the development of a method of...
A conceptual design study was conducted to devise and evaluate techniques for the external vaporizat...
The results of an effort to plan a final verification wind tunnel test to validate the recommended c...
An algorithm for using electric currents to control pendular oscillations induced by various perturb...
Utilization in the development of multi-kW low orbit power systems is discussed. The following techn...
A data link system used on a prototype autonomous roving vehicle is described. This system provides ...
The System Design Document for the TOMS (Total Mapping Spectrometer) Near Realtime System provides d...
An 0.8 percent fuel savings was achieved by a reduction in engine bleed air through the use of cabin...
General criteria for design of equipment and facilities to be used at Kennedy Space Cente
A three-person capacity preprototype vapor compression distillation subsystem for recovering potable...
The FORTRAN computer program RAWINPROC accepts output from NASA Wallops computer program METPASS1; a...
Pressure sensors, blood flow transducers, pH electrodes, and photographic recording of biological da...