The growth of 100 kg of silicon single crystal material, ten cm in diameter or greater, and 150 kg of silicon single crystal material 15 cm or greater utilizing one common silicon container material (one crucible) is investigated. A crystal grower that is recharged with a new supply of polysilicon material while still under vacuum and at temperatures above the melting point of silicon is developed. It accepts large polysilicon charges up to 30 kg, grows large crystal ingots (to 15 cm diameter and 25 kg in weight), and holds polysilicon material for recharging (rod or lump) while, at the same time, growing crystal ingots. Special equipment is designed to recharge polysilicon rods, recharge polysilicon lumps, and handle and store large, hot s...
The design and development of equipment and processes to demonstrate continuous growth of crystals b...
A summary of advanced Cz ingot-growth activities is presented. Five ingots (totalling 150 kg) were g...
The purpose of this specific phase of the continuous liquid feed program is the design and developme...
During the reporting period, a successful 100 kilogram run was performed. Six ingots of 13 cm diamet...
The development of equipment and processes to produce single crystal solar silicon by a continuous C...
Equipment developed for the manufacture of over 100 kg of silicon ingot from one crucible by rechang...
The development of a Czochralski furnace that permits the growing of silicon crystals with a continu...
A process for the continuous growth of crystals by the Czochralski method, suitable for producing si...
The process development continued, with a total of nine crystal growth runs. One of these was a 150 ...
The goals in this program for advanced czochralski growth process to produce low cost 150 kg silicon...
The purpose of the program is to demonstrate the growth of up to 150 kilograms of 6'' diameter singl...
The modified CG2000 crystal grower construction, installation, and machine check-out was completed. ...
During this reporting period, four more 100 kg continuous runs were completed to satisfy the six req...
Several economic analyses had indicated that large-diameter, multiple ingot growth using a single cr...
The modified CG2000 crystal grower construction, installation, and machine check out was completed. ...
The design and development of equipment and processes to demonstrate continuous growth of crystals b...
A summary of advanced Cz ingot-growth activities is presented. Five ingots (totalling 150 kg) were g...
The purpose of this specific phase of the continuous liquid feed program is the design and developme...
During the reporting period, a successful 100 kilogram run was performed. Six ingots of 13 cm diamet...
The development of equipment and processes to produce single crystal solar silicon by a continuous C...
Equipment developed for the manufacture of over 100 kg of silicon ingot from one crucible by rechang...
The development of a Czochralski furnace that permits the growing of silicon crystals with a continu...
A process for the continuous growth of crystals by the Czochralski method, suitable for producing si...
The process development continued, with a total of nine crystal growth runs. One of these was a 150 ...
The goals in this program for advanced czochralski growth process to produce low cost 150 kg silicon...
The purpose of the program is to demonstrate the growth of up to 150 kilograms of 6'' diameter singl...
The modified CG2000 crystal grower construction, installation, and machine check-out was completed. ...
During this reporting period, four more 100 kg continuous runs were completed to satisfy the six req...
Several economic analyses had indicated that large-diameter, multiple ingot growth using a single cr...
The modified CG2000 crystal grower construction, installation, and machine check out was completed. ...
The design and development of equipment and processes to demonstrate continuous growth of crystals b...
A summary of advanced Cz ingot-growth activities is presented. Five ingots (totalling 150 kg) were g...
The purpose of this specific phase of the continuous liquid feed program is the design and developme...