Fillers, when surface treated with a silane coupling agent, disperse more in a polymer matrix and promote better adhesion between the filler particles and matrix polymer. When a matrix polymer is unreactive, adhesion is not expected to improve by the action of coupling agents alone. The presence of a grafting agent facilitates reaction between the surface treated hydroxyapatite (HA) and the polyethylene matrix, thus improving the mechanical properties. The results obtained on the composites indicate that attempts to graft and/or couple HA to polyethylene leads to a reduction in modulus values.link_to_subscribed_fulltex
In this study, we modified the surface of hydroxyapatite (HA) particle by ring-opening polymerizatio...
In this study, poly(lactic acid) (PLA)/hydroxyapatite (HA) composites were produced through extrusio...
The purpose of this work was to study how mineral fillers would behave in a polypropylene (PP) matri...
The mechanical properties of hydroxyapatite-polyethylene composites have been improved by increasing...
Hydroxyapatite (HA)-reinforced polyethylene was developed as a bone replacement material. In order t...
Silanation of hydroxyapatite and acrylic acid grafting of polyethylene were employed to improve bond...
To improve the mechanical properties and the bioactivity of PolyacitveTM, hydroxyapatite particles w...
To improve the mechanical properties and the bioactivity of PolyacitveTM, hydroxyapatite particles w...
Compressive and flexural behavior and properties of hydroxyapatie/ polyethylene (HA/PE) composite we...
Dynamic mechanical analysis (DMA) was used to characterize biomedical composites consisting of synth...
Synthetic hydroxyapatite particles of two median sizes and different morphologies have been used to ...
In an effort to make composites from hydroxyapatite and a PEG/PBT copolymer (PolyactiveTM 70/30), ch...
Tensile and shear properties were determined for hydroxyapatite reinforced polyethylene composites (...
Hydroxyapatite (HA) particles were modified by in situ polymerization of styrene (St) and in situ co...
Several coupling treatments based on silane chemicals were investigated for the development of high ...
In this study, we modified the surface of hydroxyapatite (HA) particle by ring-opening polymerizatio...
In this study, poly(lactic acid) (PLA)/hydroxyapatite (HA) composites were produced through extrusio...
The purpose of this work was to study how mineral fillers would behave in a polypropylene (PP) matri...
The mechanical properties of hydroxyapatite-polyethylene composites have been improved by increasing...
Hydroxyapatite (HA)-reinforced polyethylene was developed as a bone replacement material. In order t...
Silanation of hydroxyapatite and acrylic acid grafting of polyethylene were employed to improve bond...
To improve the mechanical properties and the bioactivity of PolyacitveTM, hydroxyapatite particles w...
To improve the mechanical properties and the bioactivity of PolyacitveTM, hydroxyapatite particles w...
Compressive and flexural behavior and properties of hydroxyapatie/ polyethylene (HA/PE) composite we...
Dynamic mechanical analysis (DMA) was used to characterize biomedical composites consisting of synth...
Synthetic hydroxyapatite particles of two median sizes and different morphologies have been used to ...
In an effort to make composites from hydroxyapatite and a PEG/PBT copolymer (PolyactiveTM 70/30), ch...
Tensile and shear properties were determined for hydroxyapatite reinforced polyethylene composites (...
Hydroxyapatite (HA) particles were modified by in situ polymerization of styrene (St) and in situ co...
Several coupling treatments based on silane chemicals were investigated for the development of high ...
In this study, we modified the surface of hydroxyapatite (HA) particle by ring-opening polymerizatio...
In this study, poly(lactic acid) (PLA)/hydroxyapatite (HA) composites were produced through extrusio...
The purpose of this work was to study how mineral fillers would behave in a polypropylene (PP) matri...