Add to ORKGThe results of conducting X-ray analysis of the powders, obtained by the electroerosive dispersing of hard alloy wastes brand T15K6 in distilled water are presented. It was established experimentally, that the obtained powder particles consist of the following main phases: W, TiC, W2C, WC, Co and CoO
Chromium is the most common alloying element. Chromium alloyed steel has increased strength, hardnes...
The wide use of the EED method for processing metal waste into powders for the purpose of their reus...
Alloyed steels and alloys containing a significant amount of non-ferrous metals are used for the man...
The results of experimental studies of metal powders composition produced by electrospark dispersion...
The results of experimental studies of metal powders composition produced by electrospark dispersion...
The results of studies of the properties of the powders obtained by electroerosive dispersing of the...
The results of studies of relative stability of the cutting tool, restoration and strengthening by e...
The method of electro-erosive dispersion (EED) is characterized by relatively low energy costs and e...
This article presents the results of elemental composition study of the electro-erosion powders, obt...
The prospects of using the method for dispersing the EDM carbide nanopowders. It is noted that the e...
Presents the results of research of phase composition of samples sintered from tungsten-containing c...
Experimental results of physicochemical and sorption properties of material samples obtained by elec...
Presents the results of a study of x-ray analysis of the powder obtained by electro erosion dispersi...
The article presents the results of the studies of the composition, structure and properties of the ...
One of the main directions of engineering technology development at present is the improvement of ex...
Chromium is the most common alloying element. Chromium alloyed steel has increased strength, hardnes...
The wide use of the EED method for processing metal waste into powders for the purpose of their reus...
Alloyed steels and alloys containing a significant amount of non-ferrous metals are used for the man...
The results of experimental studies of metal powders composition produced by electrospark dispersion...
The results of experimental studies of metal powders composition produced by electrospark dispersion...
The results of studies of the properties of the powders obtained by electroerosive dispersing of the...
The results of studies of relative stability of the cutting tool, restoration and strengthening by e...
The method of electro-erosive dispersion (EED) is characterized by relatively low energy costs and e...
This article presents the results of elemental composition study of the electro-erosion powders, obt...
The prospects of using the method for dispersing the EDM carbide nanopowders. It is noted that the e...
Presents the results of research of phase composition of samples sintered from tungsten-containing c...
Experimental results of physicochemical and sorption properties of material samples obtained by elec...
Presents the results of a study of x-ray analysis of the powder obtained by electro erosion dispersi...
The article presents the results of the studies of the composition, structure and properties of the ...
One of the main directions of engineering technology development at present is the improvement of ex...
Chromium is the most common alloying element. Chromium alloyed steel has increased strength, hardnes...
The wide use of the EED method for processing metal waste into powders for the purpose of their reus...
Alloyed steels and alloys containing a significant amount of non-ferrous metals are used for the man...