Add to ORKGThe article presents the results of the studies of the composition, structure and properties of the hard alloy produced using hot-pressing technique with the high current passage from the powder produced us-ing electroerosion dispersion of sintered hard alloys wastes in lamp kerosene and distilled water. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/3610
The need for structural materials with useful strength above 1600 k has stimulated interest in refra...
The overall objective of this project was to construct a process-structure-property-performance (PSP...
Bien que la métallurgie soit très ancienne, de nombreuses innovations sont toujours envisagées, c’es...
The results of studies of relative stability of the cutting tool, restoration and strengthening by e...
Presents the results of research of phase composition of samples sintered from tungsten-containing c...
The prospects of using the method for dispersing the EDM carbide nanopowders. It is noted that the e...
The results of experimental studies of metal powders composition produced by electrospark dispersion...
The article presents the results of experimental research aimed at studying the fractional compositi...
The paper provides the results of experimental research into properties of tungsten nanopowders synt...
The paper presents the results of a study of the microhardness of the WNF-95 sintered electroerosive...
Tungsten Carbide - Processing and Applications, provides fundamental and practical information of tu...
The results of conducting X-ray analysis of the powders, obtained by the electroerosive dispersing o...
Amorphous and nanocrystalline W-based materials are candidate alloys where high toughness and abrasi...
Composites of metals and carbon nanotubes (CNTs) are of interest due to their better mechanical prop...
PRiME 2020, Honolulu, USA, October 4-9, 2020.The electrodeposition of W films was investigated in KF...
The need for structural materials with useful strength above 1600 k has stimulated interest in refra...
The overall objective of this project was to construct a process-structure-property-performance (PSP...
Bien que la métallurgie soit très ancienne, de nombreuses innovations sont toujours envisagées, c’es...
The results of studies of relative stability of the cutting tool, restoration and strengthening by e...
Presents the results of research of phase composition of samples sintered from tungsten-containing c...
The prospects of using the method for dispersing the EDM carbide nanopowders. It is noted that the e...
The results of experimental studies of metal powders composition produced by electrospark dispersion...
The article presents the results of experimental research aimed at studying the fractional compositi...
The paper provides the results of experimental research into properties of tungsten nanopowders synt...
The paper presents the results of a study of the microhardness of the WNF-95 sintered electroerosive...
Tungsten Carbide - Processing and Applications, provides fundamental and practical information of tu...
The results of conducting X-ray analysis of the powders, obtained by the electroerosive dispersing o...
Amorphous and nanocrystalline W-based materials are candidate alloys where high toughness and abrasi...
Composites of metals and carbon nanotubes (CNTs) are of interest due to their better mechanical prop...
PRiME 2020, Honolulu, USA, October 4-9, 2020.The electrodeposition of W films was investigated in KF...
The need for structural materials with useful strength above 1600 k has stimulated interest in refra...
The overall objective of this project was to construct a process-structure-property-performance (PSP...
Bien que la métallurgie soit très ancienne, de nombreuses innovations sont toujours envisagées, c’es...