The paper addresses the effect of ageing on the magnetic, mechanical and structural behavior of modified 9Cr-1Mo steels. Magnetic Barkhausen Emission (MBE) technique has been used to evaluate the magnetic properties. Initial magnetic softening due to stress relaxation effects was indicated by an increase in MBE rms voltage. The subsequent precipitation of fine carbides above 50hrs of ageing was indicated by magnetic hardening (rms decrease). However, such precipitation hardening was indicated by monotonic increase in mechanical hardness upto 500hrs of ageing. Scanning electron microscopy (SEM) indicated the formation of such fine carbides. Ageing beyond 1000hrs led to coarsening of carbides and also compositional changes in the matrix as we...
The paper presents the results of research on the microstructure of martensitic X10CrMoVNb9-1 (P91) ...
Power plant components are expected to withstand service at high temperature and pressure for thirty...
The aim of the study is to investigate the effect of aging of solution annealed M250 grade maraging ...
Magnetic hysteresis loop and Barkhausen emissions were recorded and analysed for 5Cr–0.5Mo steel aft...
The best combinations of mechanical properties (yield stress and fracture toughness) of M250 maragin...
Modified 9Cr–1Mo steels were normalized at 1050 °C/30 min and tempered over a wide range of temperat...
Water-quenched modified 9Cr-1Mo steel was creep tested in the laboratory at a temperature of 600 A d...
5Cr–0.5Mo steel having initial bainitic microstructure has been aged at 600 °C for 5000 h and subjec...
Application of magnetic Barkhausen emission (MBE) analysis for assessment of microstructures and dam...
Low alloy steel such as 1.25Cr–0.50 Mo steel is widely used in thermal power plants, petro-chemical ...
Slow plastic deformation at elevated temperature (0.5 to 0.7 of the melting temperature) and stress ...
Creep damage behaviour of water quenched 5Cr–0.5Mo steel has been studied using magnetic Barkhausen ...
Magnetic Barkhausen emissions (MBE) and magnetic hysteresis loop techniques have been used to correl...
Magnetic properties and Rockwell hardness of 1Cr-0.5Mo steel have been investigated as a function of...
In this study, a micro-magnetic non-destructive technique, namely magnetic Barkhausen emission (MBE)...
The paper presents the results of research on the microstructure of martensitic X10CrMoVNb9-1 (P91) ...
Power plant components are expected to withstand service at high temperature and pressure for thirty...
The aim of the study is to investigate the effect of aging of solution annealed M250 grade maraging ...
Magnetic hysteresis loop and Barkhausen emissions were recorded and analysed for 5Cr–0.5Mo steel aft...
The best combinations of mechanical properties (yield stress and fracture toughness) of M250 maragin...
Modified 9Cr–1Mo steels were normalized at 1050 °C/30 min and tempered over a wide range of temperat...
Water-quenched modified 9Cr-1Mo steel was creep tested in the laboratory at a temperature of 600 A d...
5Cr–0.5Mo steel having initial bainitic microstructure has been aged at 600 °C for 5000 h and subjec...
Application of magnetic Barkhausen emission (MBE) analysis for assessment of microstructures and dam...
Low alloy steel such as 1.25Cr–0.50 Mo steel is widely used in thermal power plants, petro-chemical ...
Slow plastic deformation at elevated temperature (0.5 to 0.7 of the melting temperature) and stress ...
Creep damage behaviour of water quenched 5Cr–0.5Mo steel has been studied using magnetic Barkhausen ...
Magnetic Barkhausen emissions (MBE) and magnetic hysteresis loop techniques have been used to correl...
Magnetic properties and Rockwell hardness of 1Cr-0.5Mo steel have been investigated as a function of...
In this study, a micro-magnetic non-destructive technique, namely magnetic Barkhausen emission (MBE)...
The paper presents the results of research on the microstructure of martensitic X10CrMoVNb9-1 (P91) ...
Power plant components are expected to withstand service at high temperature and pressure for thirty...
The aim of the study is to investigate the effect of aging of solution annealed M250 grade maraging ...