The electrochemical response of Al94−xNi6Lax alloys (x = 4, 5, 6, 7) after different stages of devitrification was studied in 0.05 M Na2SO4 as well as in different concentrations [0.001 M, 0.01 M and 0.1 M] NaCl solutions. Complementary crystallization studies were carried out to elucidate the composition dependent phase evolution in these alloys. It was observed that the primary crystallization did not cause any deterioration in the corrosion resistance of the alloys as compared to the amorphous alloys. In the case of Al87Ni6La7, there was actually an improvement in the passivating ability in benign media. The various primary crystalline phases in the different alloys investigated did not cause different electrochemical responses. However,...
The β phase (Al12Mg17) precipitated by heat treatment in some alloy compositions may result deterior...
The electrochemical and corrosion behaviour of 6013-T6, 2024-T3 aluminium alloys and pure aluminium ...
The corrosion performance of as-solidified Al-Pd alloys in HCl and NaOH aqueous solutions is inve...
The electrochemical response of melt-spun Al-Ni-La alloys with partial substitution of Ni after diff...
Two amorphous ribbons with the compositions of Al88Ni6La6 and Al86Ni6La6Cu2 were made using the melt...
The electrochemical behavior of Al-Mg alloys were studied by means of a potentiostat. Since oxide fi...
The corrosion behaviour of innovative Li-containing (AA2198) and Ag-containing (AA2139) aluminium a...
The effect of the β phase (Al12Mg17) on the corrosion resistance in a NaCl solution was investigated...
Microstructural control through heat treatments is one of the most important means of designing allo...
The formation of quasicrystalline decagonal phase and related crystalline phases was investigated by...
In this study, the corrosion mechanisms of the AA2024-T3 and the AA2098-T351 were investigated and c...
This work reports an electrochemical investigation of corrosion and repassivation in NaCl solutions ...
Effects of heat treatment and quenching regimen on the electrochemical corrosion behaviour of alumin...
The effect of varying the percent crystallinity on the electrochemical behavior of Mg65Cu25Y10 and M...
The AlMg-alloy was made by melting Al and Mg ingot pieces in an alumine crucible, kept in a resistan...
The β phase (Al12Mg17) precipitated by heat treatment in some alloy compositions may result deterior...
The electrochemical and corrosion behaviour of 6013-T6, 2024-T3 aluminium alloys and pure aluminium ...
The corrosion performance of as-solidified Al-Pd alloys in HCl and NaOH aqueous solutions is inve...
The electrochemical response of melt-spun Al-Ni-La alloys with partial substitution of Ni after diff...
Two amorphous ribbons with the compositions of Al88Ni6La6 and Al86Ni6La6Cu2 were made using the melt...
The electrochemical behavior of Al-Mg alloys were studied by means of a potentiostat. Since oxide fi...
The corrosion behaviour of innovative Li-containing (AA2198) and Ag-containing (AA2139) aluminium a...
The effect of the β phase (Al12Mg17) on the corrosion resistance in a NaCl solution was investigated...
Microstructural control through heat treatments is one of the most important means of designing allo...
The formation of quasicrystalline decagonal phase and related crystalline phases was investigated by...
In this study, the corrosion mechanisms of the AA2024-T3 and the AA2098-T351 were investigated and c...
This work reports an electrochemical investigation of corrosion and repassivation in NaCl solutions ...
Effects of heat treatment and quenching regimen on the electrochemical corrosion behaviour of alumin...
The effect of varying the percent crystallinity on the electrochemical behavior of Mg65Cu25Y10 and M...
The AlMg-alloy was made by melting Al and Mg ingot pieces in an alumine crucible, kept in a resistan...
The β phase (Al12Mg17) precipitated by heat treatment in some alloy compositions may result deterior...
The electrochemical and corrosion behaviour of 6013-T6, 2024-T3 aluminium alloys and pure aluminium ...
The corrosion performance of as-solidified Al-Pd alloys in HCl and NaOH aqueous solutions is inve...