The internal friction ($Q^{ - 1}$) in multiple-components ceramics PZT type was measured as a function of temperature from 300 to 600 K. An internal friction peak (P$_{2}$) appears a few dozen degrees below Curie temperature ($T_{C}$). The P$_{2}$ peak of internal friction is found to be associated with the viscous-elastic mobility of domain walls. The internal friction due to the viscous-elastic mobility of domain walls was calculated and compared with the experimental data
The superior piezoelectric properties of all polycrystalline ferroelectrics are based on the extent ...
The (Pb0.9Ba0.1)(Zr0.53Ti0.47)O3 + 2% mol. Nb2O5 ceramics were prepared from high purity synthesized...
The (Pb0.9Ba0.1)(Zr0.53Ti0.47)O3 + 2 % mol. Nb2O5 ceramics were prepared from high purity synthesize...
The internal friction ($Q^{ - 1}$) in multiple-components ceramics PZT type was measured as a functi...
Abstract. The internal friction (Q−1) in multiple-components ceramics PZT type was measured as a fun...
Internal friction Q–1 and Young‘s modulus E were measured as functions of temperature for undoped Pb...
Elastic modulus (shear modulus G or Young's modulus E) and internal friction Q-1 were measured as a ...
This work presents a study of the domain wall dynamics in Pb(Zr1−xTix)O3 (PZT)-based piezoceramics b...
The results of internal friction background examined in fine-grained lead zirconate titanate PZT ce-...
In the work, temperature Q-1(T) and amplitude Q-1 (ε) dependences of internal friction for ferroelec...
Stress amplitude and temperature dependences of internal friction in polycrystal and single crystal ...
Two internal friction peaks (50 - 100kHz) have been measured in LNPP near its transition temperature...
The complex, non-linear, irreversible, hysteretic behavior of polycryst. ferroelec. materials is the...
Description of the mechanisms responsible for the dissipation of energy in materials is possible tha...
High values of dielectric and piezoelectric coefficients in piezoceramics are due to the superpositi...
The superior piezoelectric properties of all polycrystalline ferroelectrics are based on the extent ...
The (Pb0.9Ba0.1)(Zr0.53Ti0.47)O3 + 2% mol. Nb2O5 ceramics were prepared from high purity synthesized...
The (Pb0.9Ba0.1)(Zr0.53Ti0.47)O3 + 2 % mol. Nb2O5 ceramics were prepared from high purity synthesize...
The internal friction ($Q^{ - 1}$) in multiple-components ceramics PZT type was measured as a functi...
Abstract. The internal friction (Q−1) in multiple-components ceramics PZT type was measured as a fun...
Internal friction Q–1 and Young‘s modulus E were measured as functions of temperature for undoped Pb...
Elastic modulus (shear modulus G or Young's modulus E) and internal friction Q-1 were measured as a ...
This work presents a study of the domain wall dynamics in Pb(Zr1−xTix)O3 (PZT)-based piezoceramics b...
The results of internal friction background examined in fine-grained lead zirconate titanate PZT ce-...
In the work, temperature Q-1(T) and amplitude Q-1 (ε) dependences of internal friction for ferroelec...
Stress amplitude and temperature dependences of internal friction in polycrystal and single crystal ...
Two internal friction peaks (50 - 100kHz) have been measured in LNPP near its transition temperature...
The complex, non-linear, irreversible, hysteretic behavior of polycryst. ferroelec. materials is the...
Description of the mechanisms responsible for the dissipation of energy in materials is possible tha...
High values of dielectric and piezoelectric coefficients in piezoceramics are due to the superpositi...
The superior piezoelectric properties of all polycrystalline ferroelectrics are based on the extent ...
The (Pb0.9Ba0.1)(Zr0.53Ti0.47)O3 + 2% mol. Nb2O5 ceramics were prepared from high purity synthesized...
The (Pb0.9Ba0.1)(Zr0.53Ti0.47)O3 + 2 % mol. Nb2O5 ceramics were prepared from high purity synthesize...