Add to ORKGAt the time of the accident [the] deminer had identified a reading within a row of mines in the Cordon Sanitaire Minefield. Ground conditions were favourable with relatively level ground and not very hard but with small loose stones. The deminer was wearing full PPE including gloves in both hands for arm protection. After identifying a reading, the deminer pinpointed and started excavating. From his own statement, he had already located the mine and was further exposing it when it went off. He further states that a rock rolled back into the hole he was excavating and landed on a mine causing it to detonate
The Deminer was trying to check signal using the heavy rake, the M14 mine was laid in a grassy solid...
The incident happened while the deminer trying to investigate a signal using the heavy RAKE. The dem...
The investigators concluded that the victim was carrying out an excavation drill correctly. A high ...
The deminer identified the reading within the confirmed row of mines. The deminer acted on this read...
The victim had been investigating a detector reading (at around 11:00) with his prodder when a mine ...
The victim initiated a mine at 13:10 while he was prodding to investigate a detector reading. His vi...
The victim was carrying out a normal excavation drill at 10:45 when a mine, suspected R2M2…function...
The investigators concluded that the victim was working correctly and was excavating a detector read...
On 22 April 2000, the Deminer was conducting clearance activities in the CS [Cordon Sanitaire] along...
According to the AMAC Northeast’s investigation report, the accident occurred while the deminer was ...
At 10:50 on 11 Aug 2000, [the victim – name withheld by group manager] detonated a mine whilst condu...
When the deminer came alongside the first mine, he located another, and called the victim again. The...
The document stated that the deminers were working on a bare and stony slope. They were familiar wi...
On 5 October at 12:55, [the victim] was carrying out normal demining duties with complete PPE on. He...
The investigators said that, When the deminer registered a reading on the detector, he marked the r...
The Deminer was trying to check signal using the heavy rake, the M14 mine was laid in a grassy solid...
The incident happened while the deminer trying to investigate a signal using the heavy RAKE. The dem...
The investigators concluded that the victim was carrying out an excavation drill correctly. A high ...
The deminer identified the reading within the confirmed row of mines. The deminer acted on this read...
The victim had been investigating a detector reading (at around 11:00) with his prodder when a mine ...
The victim initiated a mine at 13:10 while he was prodding to investigate a detector reading. His vi...
The victim was carrying out a normal excavation drill at 10:45 when a mine, suspected R2M2…function...
The investigators concluded that the victim was working correctly and was excavating a detector read...
On 22 April 2000, the Deminer was conducting clearance activities in the CS [Cordon Sanitaire] along...
According to the AMAC Northeast’s investigation report, the accident occurred while the deminer was ...
At 10:50 on 11 Aug 2000, [the victim – name withheld by group manager] detonated a mine whilst condu...
When the deminer came alongside the first mine, he located another, and called the victim again. The...
The document stated that the deminers were working on a bare and stony slope. They were familiar wi...
On 5 October at 12:55, [the victim] was carrying out normal demining duties with complete PPE on. He...
The investigators said that, When the deminer registered a reading on the detector, he marked the r...
The Deminer was trying to check signal using the heavy rake, the M14 mine was laid in a grassy solid...
The incident happened while the deminer trying to investigate a signal using the heavy RAKE. The dem...
The investigators concluded that the victim was carrying out an excavation drill correctly. A high ...