Add to ORKGThe group operated using a one-man drill and a two-man team with the resting deminers in a designated rest-area. Working time varied between 30 minutes and an hour depending on the weather conditions . The last MACC QA visit had been seven days before. [There was no mention of metal-detectors in the report, so it is presumed that a sapping drill was being used.
The team were finishing their shift for the day and the victim was asked to mark the edge of the are...
The investigators determined that the deminer was excavating to investigate a detector reading whe...
The victim was going to inspect the work of a breaching party when at 09:30 he stepped on a mine tha...
As he was going down the row to mark the end of the row, he stood on two PMA-1 mines on top of each ...
The victim was working in an area of low brush adjacent to a (then) disused farm vehicle track. He w...
Work began at the site at 08:00. At 09:50 a deminer reported having found a PMA-3 while prodding [no...
The accident occurred at the start of the working day when the victim began working in the same lane...
The demining team had been working at the site since February. The Victim was working in a breaching...
The [Demining group] base informed [demining group Programme Manager] that Morina #2 clearance have ...
This minefield is PMA 3 Anti Personnel Blast minefield with the mines laid in a very dense pattern. ...
At 09h15, the team arrived to Koshare 1. At 11h15, the Team Leader moves [the Victim] to the new wor...
After lunch four of the deminers were tasked to build a bridge over a creek to allow better access t...
A demining section from demining platoon No 2 were working at the demining site at Kraljan. At appro...
At approximately 08:40 hrs whilst Deminer [name excised] was either investigation a previously ident...
On the 7th Oct 2010 at 08:40, the deminer [the Victim] initiated a PMN anti-personnel mine with a pi...
The team were finishing their shift for the day and the victim was asked to mark the edge of the are...
The investigators determined that the deminer was excavating to investigate a detector reading whe...
The victim was going to inspect the work of a breaching party when at 09:30 he stepped on a mine tha...
As he was going down the row to mark the end of the row, he stood on two PMA-1 mines on top of each ...
The victim was working in an area of low brush adjacent to a (then) disused farm vehicle track. He w...
Work began at the site at 08:00. At 09:50 a deminer reported having found a PMA-3 while prodding [no...
The accident occurred at the start of the working day when the victim began working in the same lane...
The demining team had been working at the site since February. The Victim was working in a breaching...
The [Demining group] base informed [demining group Programme Manager] that Morina #2 clearance have ...
This minefield is PMA 3 Anti Personnel Blast minefield with the mines laid in a very dense pattern. ...
At 09h15, the team arrived to Koshare 1. At 11h15, the Team Leader moves [the Victim] to the new wor...
After lunch four of the deminers were tasked to build a bridge over a creek to allow better access t...
A demining section from demining platoon No 2 were working at the demining site at Kraljan. At appro...
At approximately 08:40 hrs whilst Deminer [name excised] was either investigation a previously ident...
On the 7th Oct 2010 at 08:40, the deminer [the Victim] initiated a PMN anti-personnel mine with a pi...
The team were finishing their shift for the day and the victim was asked to mark the edge of the are...
The investigators determined that the deminer was excavating to investigate a detector reading whe...
The victim was going to inspect the work of a breaching party when at 09:30 he stepped on a mine tha...