Add to ORKGThere was a safe lane at the bottom of the embankment and deminers were working uphill from it. The victim had been working for fifteen minutes when he decided to clear a wire that was in front of his cleared area. He checked with the Schiebel detector and picked up a reading that he thought was the wire, so ignored it. He entered the uncleared area, cut the wire, and slipped back down the embankment
On the day of the accident the victim started work at 07:00 clearing a line to the spot were they e...
The investigators determined that the victim had checked the area with a detector then started to cu...
The accident occurred while carrying out a Survey Level 2 at Save minefield and the first deminer wa...
The investigators determined that the victim was pulling a wire obstacle out of the way when he acci...
On 7th July 2000, the victim was continuing his clearance along the wire. The victim started work in...
The Victim was working in a breaching party making a lane to the top of the hill. He had been workin...
After lunch four of the deminers were tasked to build a bridge over a creek to allow better access t...
The victim was continuing the breach begun by the earlier victim. He worked a further ten metres and...
The victim was working in an area of low brush adjacent to a (then) disused farm vehicle track. He w...
Work began on 18th May 1995 and one side was cleared that day, with a POMZ-2 located and destroyed. ...
The victim set off an OZM-72 bounding fragmentation mine at about 12:27, and was killed. An internal...
The soil was rocky, highly metallic and with dense vegetation, but still he carried on working only ...
Both reports agreed that the victim had located a signal with a Vallon detector and was investigatin...
When the deminer came alongside the first mine, he located another, and called the victim again. The...
The accident occurred in a defensive ring of mines laid during 1987. The ring formed part of the pro...
On the day of the accident the victim started work at 07:00 clearing a line to the spot were they e...
The investigators determined that the victim had checked the area with a detector then started to cu...
The accident occurred while carrying out a Survey Level 2 at Save minefield and the first deminer wa...
The investigators determined that the victim was pulling a wire obstacle out of the way when he acci...
On 7th July 2000, the victim was continuing his clearance along the wire. The victim started work in...
The Victim was working in a breaching party making a lane to the top of the hill. He had been workin...
After lunch four of the deminers were tasked to build a bridge over a creek to allow better access t...
The victim was continuing the breach begun by the earlier victim. He worked a further ten metres and...
The victim was working in an area of low brush adjacent to a (then) disused farm vehicle track. He w...
Work began on 18th May 1995 and one side was cleared that day, with a POMZ-2 located and destroyed. ...
The victim set off an OZM-72 bounding fragmentation mine at about 12:27, and was killed. An internal...
The soil was rocky, highly metallic and with dense vegetation, but still he carried on working only ...
Both reports agreed that the victim had located a signal with a Vallon detector and was investigatin...
When the deminer came alongside the first mine, he located another, and called the victim again. The...
The accident occurred in a defensive ring of mines laid during 1987. The ring formed part of the pro...
On the day of the accident the victim started work at 07:00 clearing a line to the spot were they e...
The investigators determined that the victim had checked the area with a detector then started to cu...
The accident occurred while carrying out a Survey Level 2 at Save minefield and the first deminer wa...