Add to ORKGThe deminer and his partner began work at 0730. By 0850, they had cleared 50 square meters. Both men wore frag-jackets, helmets and visors. The victim was clearing by using his prodder. He was called to help his section leader remove grass from a large pothole in the road. As he returned at 0850, he stepped on a mine he had previously missed. (Extracted from the Database of Demining Incident Victims, 1999, Incident #53.
The investigators determined that the victim used his detector over the two meter clearance lane he ...
The deminer was conducting manual clearance utilising full excavation drills. At 09:15 he was excava...
Demining team management claim the deminer was injured when he laid his helmet and PPE down onto a m...
Now, as always, there is a huge debate about what protection is required and what Personal Protectiv...
The document states that the demining team were working in a gulley in a wooded area. They had used...
In Cambodia, a deminer was working in the prone position and set off an anti-personnel type 72 Chine...
On 30 October at 10:40 hrs a PMN anti personnel mine detonated on [the Victim] deminer of party 05, ...
Based the [Demining Group] OPS Officer verbal report the injured Deminer was during the prodding /ex...
On 10 May 2009 at 10:35 [the Victim] the deminer of [Demining group] DT-02 was excavating on a detec...
On 10 April 2007 at 1155 hrs while deminer [the Victim] with employ No. 4094 was working in his clea...
A [Demining group] Manual Team One, deminer hit a No.10 AP mine from the top that resulted in a mine...
When the deminer came alongside the first mine, he located another, and called the victim again. The...
The document stated that the demining group were working in a wooded area known to be mined. The SFO...
The victim had been a deminer for three years. It was two months since he had last attended a revisi...
A [Demining group] Manual Team One, deminer hit a No.10 AP mine from the top that resulted in a mine...
The investigators determined that the victim used his detector over the two meter clearance lane he ...
The deminer was conducting manual clearance utilising full excavation drills. At 09:15 he was excava...
Demining team management claim the deminer was injured when he laid his helmet and PPE down onto a m...
Now, as always, there is a huge debate about what protection is required and what Personal Protectiv...
The document states that the demining team were working in a gulley in a wooded area. They had used...
In Cambodia, a deminer was working in the prone position and set off an anti-personnel type 72 Chine...
On 30 October at 10:40 hrs a PMN anti personnel mine detonated on [the Victim] deminer of party 05, ...
Based the [Demining Group] OPS Officer verbal report the injured Deminer was during the prodding /ex...
On 10 May 2009 at 10:35 [the Victim] the deminer of [Demining group] DT-02 was excavating on a detec...
On 10 April 2007 at 1155 hrs while deminer [the Victim] with employ No. 4094 was working in his clea...
A [Demining group] Manual Team One, deminer hit a No.10 AP mine from the top that resulted in a mine...
When the deminer came alongside the first mine, he located another, and called the victim again. The...
The document stated that the demining group were working in a wooded area known to be mined. The SFO...
The victim had been a deminer for three years. It was two months since he had last attended a revisi...
A [Demining group] Manual Team One, deminer hit a No.10 AP mine from the top that resulted in a mine...
The investigators determined that the victim used his detector over the two meter clearance lane he ...
The deminer was conducting manual clearance utilising full excavation drills. At 09:15 he was excava...
Demining team management claim the deminer was injured when he laid his helmet and PPE down onto a m...