Macro-biomechanical parameters measured by three-point bending test.

List of quantitative biomechanical parameters considered by this research; and related abbreviations (n = 25).

Moreno D'Amico (4167364)
Edyta Kinel (4167370)
Piero Roncoletta (4167367)

June 2017

List of quantitative biomechanical parameters considered by this research; and related abbreviati...

Mean stiffness results under volar and dorsal bending between groups.

Xiong Liu (43564)
Wei-dong Wu (606976)
Ya-feng Fang (606977)
Mei-chao Zhang (606978)
Wen-hua Huang (606979)

July 2014

Stiffness values of each group under volar and dorsal bending load were not significantly differe...

Correlation between fracture load (measured using a three-point bending test) and areal BMD (measured using DXA).

Jui-Ting Hsu (296143)
Ying-Ju Chen (296144)
Ming-Tzu Tsai (296145)
Howard Haw-Chang Lan (296146)
Fu-Chou Cheng (296147)
Michael Y. C. Chen (296148)
Shun-Ping Wang (296150)

February 2013

Correlation between fracture load (measured using a three-point bending test) and areal BMD (meas...

Biomechanical analysis results.

Gina A. Mackert (4678747)
Matthias Schulte (312244)
Christoph Hirche (766635)
Dimitra Kotsougiani (4678750)
Julian Vogelpohl (3524618)
Bernd Hoener (4678744)
Teresa Fiebig (333464)
Stefanie Kirschner (741235)
Marc A. Brockmann (333470)
Marcus Lehnhardt (20159)
Ulrich Kneser (484321)
Leila Harhaus (4678753)

December 2017

Biomechanical analysis results regarding the average A) stiffness in N/mm and B) yield load in N....

R2 values among BMD, structure, nanomechanical, FTIR, and biomechanical parameters studied in sham group.

Xin-Xin Wen (750125)
Fa-Qi Wang (750126)
Chao Xu (201376)
Zi-Xiang Wu (132540)
Yang Zhang (30734)
Ya-Fei Feng (293538)
Ya-Bo Yan (132538)
Wei Lei (132543)

June 2015

Note: Modulus and hardness were the results of nanoindentation tests. Elastic modulus, ultimate s...

Fig 5 -

Charlett Wenig (14492846)
Friedrich Reppe (14492849)
Nils Horbelt (7108679)
Jaromir Spener (14492852)
Ferréol Berendt (14492855)
Tobias Cremer (12251201)
Marion Frey (3772045)
Ingo Burgert (716810)
Michaela Eder (1945717)

January 2023

Mechanical data of three-point-bending experiments (a) samples with a length of 210 mm and a width o...

Experimentally measured densitometric and geometric parameters of the femurs and tibias obtained from DXA and CBCT. The fracture loads based on the three-point bending test are also listed.

Jui-Ting Hsu (296143)
Ying-Ju Chen (296144)
Ming-Tzu Tsai (296145)
Howard Haw-Chang Lan (296146)
Fu-Chou Cheng (296147)
Michael Y. C. Chen (296148)
Shun-Ping Wang (296150)

February 2013

SD = standard deviation; CV = coefficient of variation (SD/mean×100%); DXA = dual-energy X-ray ab...

Results of three-point flexion tests.

Ugo Heller (14425230)
Robin Evrard (14425233)
Benoit Lengelé (14425236)
Thomas Schubert (394821)
Natacha Kadlub (5465159)
Jean Boisson (5465162)

January 2023

Left, box plots representing fracture force (maximal force measured in Newton) of the three-point be...

Biomechanical results of the two available sizes thin and thick of the ADM; Values are presented as mean (SD), P- Value evaluate significances between the differences of properties of the different sizes.

Eric Dominic Roessner (304586)
Mario Vitacolonna (304587)
Peter Hohenberger (90600)

February 2013

Biomechanical results of the two available sizes thin and thick of the ADM; Values ...

Biomechanical parameters at 10 weeks: Mean value and standard deviation for specimens in the Low-Dose (LD) and High-Dose (HD) Groups.

Cesar de Cesar Netto (4849951)
Alexandre Leme Godoy-Santos (4849954)
Pedro Augusto Pontin (4849948)
Renato Jose Mendonça Natalino (4849939)
Cesar Augusto Martins Pereira (4849933)
Francisco Diego de Oliveira Lima (4849936)
Lucas Furtado da Fonseca (4849960)
Jackson Rucker Staggers (4849942)
Leonardo Muntada Cavinatto (4849957)
Lew Charles Schon (4849963)
Olavo Pires de Camargo (4849966)
Túlio Diniz Fernandes (4849945)

February 2018

Biomechanical parameters at 10 weeks: Mean value and standard deviation for specimens in the Low-...

Biomechanical parameters at 12 weeks: Mean value and standard deviation for specimens in the Low-Dose (LD) and High-Dose (HD) Groups.

Cesar de Cesar Netto (4849951)
Alexandre Leme Godoy-Santos (4849954)
Pedro Augusto Pontin (4849948)
Renato Jose Mendonça Natalino (4849939)
Cesar Augusto Martins Pereira (4849933)
Francisco Diego de Oliveira Lima (4849936)
Lucas Furtado da Fonseca (4849960)
Jackson Rucker Staggers (4849942)
Leonardo Muntada Cavinatto (4849957)
Lew Charles Schon (4849963)
Olavo Pires de Camargo (4849966)
Túlio Diniz Fernandes (4849945)

February 2018

Biomechanical parameters at 12 weeks: Mean value and standard deviation for specimens in the Low-...

Biomechanical and biochemical properties of self-assembled constructs in phase I, normalized to control values.

Benjamin D. Elder (48086)
Kyriacos A. Athanasiou (48087)

February 2013

HP application at 5 or 10 MPa, 0 Hz, resulted in a significantly higher (a) aggregate modulus, (b...

Correlation between fracture load (measured using a three-point bending test) and BSI ( = CSMI×vCtBMD).

Jui-Ting Hsu (296143)
Ying-Ju Chen (296144)
Ming-Tzu Tsai (296145)
Howard Haw-Chang Lan (296146)
Fu-Chou Cheng (296147)
Michael Y. C. Chen (296148)
Shun-Ping Wang (296150)

February 2013

Correlation between fracture load (measured using a three-point bending test) and BSI ( = CSMI×vC...

Biomechanical analysis.

J. H. Duncan Bassett (145971)
Apostolos Gogakos (145975)
Jacqueline K. White (119191)
Holly Evans (145980)
Richard M. Jacques (145985)
Anne H. van der Spek (145990)
Ramiro Ramirez-Solis (119181)
Edward Ryder (145998)
David Sunter (146002)
Alan Boyde (146008)
Michael J. Campbell (5833)
Peter I. Croucher (146016)
Graham R. Williams (20148)

August 2012

A, Load-displacement curve from a WT tibia showing yield load, maximum load, fracture load...

Values of the biomechanical test (mean ± SD; axial force, N; torsional torque, N.mm).

Yu Ding (54012)
Dike Ruan (434315)
Keith D. K. Luk (588271)
Qing He (351975)
Chaofeng Wang (588272)

June 2014

Values of the biomechanical test (mean ± SD; axial force, N; torsional torque, N.mm).</p

List of quantitative biomechanical parameters considered by this research; and related abbreviations (n = 25).

Moreno D'Amico (4167364)
Edyta Kinel (4167370)
Piero Roncoletta (4167367)

June 2017

List of quantitative biomechanical parameters considered by this research; and related abbreviati...

Mean stiffness results under volar and dorsal bending between groups.

Xiong Liu (43564)
Wei-dong Wu (606976)
Ya-feng Fang (606977)
Mei-chao Zhang (606978)
Wen-hua Huang (606979)

July 2014

Stiffness values of each group under volar and dorsal bending load were not significantly differe...

Correlation between fracture load (measured using a three-point bending test) and areal BMD (measured using DXA).

Jui-Ting Hsu (296143)
Ying-Ju Chen (296144)
Ming-Tzu Tsai (296145)
Howard Haw-Chang Lan (296146)
Fu-Chou Cheng (296147)
Michael Y. C. Chen (296148)
Shun-Ping Wang (296150)

February 2013

Correlation between fracture load (measured using a three-point bending test) and areal BMD (meas...

Biomechanical analysis results.

Gina A. Mackert (4678747)
Matthias Schulte (312244)
Christoph Hirche (766635)
Dimitra Kotsougiani (4678750)
Julian Vogelpohl (3524618)
Bernd Hoener (4678744)
Teresa Fiebig (333464)
Stefanie Kirschner (741235)
Marc A. Brockmann (333470)
Marcus Lehnhardt (20159)
Ulrich Kneser (484321)
Leila Harhaus (4678753)

December 2017

Biomechanical analysis results regarding the average A) stiffness in N/mm and B) yield load in N....

R2 values among BMD, structure, nanomechanical, FTIR, and biomechanical parameters studied in sham group.

Xin-Xin Wen (750125)
Fa-Qi Wang (750126)
Chao Xu (201376)
Zi-Xiang Wu (132540)
Yang Zhang (30734)
Ya-Fei Feng (293538)
Ya-Bo Yan (132538)
Wei Lei (132543)

June 2015

Note: Modulus and hardness were the results of nanoindentation tests. Elastic modulus, ultimate s...

Fig 5 -

Charlett Wenig (14492846)
Friedrich Reppe (14492849)
Nils Horbelt (7108679)
Jaromir Spener (14492852)
Ferréol Berendt (14492855)
Tobias Cremer (12251201)
Marion Frey (3772045)
Ingo Burgert (716810)
Michaela Eder (1945717)

January 2023

Mechanical data of three-point-bending experiments (a) samples with a length of 210 mm and a width o...

Experimentally measured densitometric and geometric parameters of the femurs and tibias obtained from DXA and CBCT. The fracture loads based on the three-point bending test are also listed.

Jui-Ting Hsu (296143)
Ying-Ju Chen (296144)
Ming-Tzu Tsai (296145)
Howard Haw-Chang Lan (296146)
Fu-Chou Cheng (296147)
Michael Y. C. Chen (296148)
Shun-Ping Wang (296150)

February 2013

SD = standard deviation; CV = coefficient of variation (SD/mean×100%); DXA = dual-energy X-ray ab...

Results of three-point flexion tests.

Ugo Heller (14425230)
Robin Evrard (14425233)
Benoit Lengelé (14425236)
Thomas Schubert (394821)
Natacha Kadlub (5465159)
Jean Boisson (5465162)

January 2023

Left, box plots representing fracture force (maximal force measured in Newton) of the three-point be...

Biomechanical results of the two available sizes thin and thick of the ADM; Values are presented as mean (SD), P- Value evaluate significances between the differences of properties of the different sizes.

Eric Dominic Roessner (304586)
Mario Vitacolonna (304587)
Peter Hohenberger (90600)

February 2013

Biomechanical results of the two available sizes thin and thick of the ADM; Values ...

Biomechanical parameters at 10 weeks: Mean value and standard deviation for specimens in the Low-Dose (LD) and High-Dose (HD) Groups.

Cesar de Cesar Netto (4849951)
Alexandre Leme Godoy-Santos (4849954)
Pedro Augusto Pontin (4849948)
Renato Jose Mendonça Natalino (4849939)
Cesar Augusto Martins Pereira (4849933)
Francisco Diego de Oliveira Lima (4849936)
Lucas Furtado da Fonseca (4849960)
Jackson Rucker Staggers (4849942)
Leonardo Muntada Cavinatto (4849957)
Lew Charles Schon (4849963)
Olavo Pires de Camargo (4849966)
Túlio Diniz Fernandes (4849945)

February 2018

Biomechanical parameters at 10 weeks: Mean value and standard deviation for specimens in the Low-...

Biomechanical parameters at 12 weeks: Mean value and standard deviation for specimens in the Low-Dose (LD) and High-Dose (HD) Groups.

Cesar de Cesar Netto (4849951)
Alexandre Leme Godoy-Santos (4849954)
Pedro Augusto Pontin (4849948)
Renato Jose Mendonça Natalino (4849939)
Cesar Augusto Martins Pereira (4849933)
Francisco Diego de Oliveira Lima (4849936)
Lucas Furtado da Fonseca (4849960)
Jackson Rucker Staggers (4849942)
Leonardo Muntada Cavinatto (4849957)
Lew Charles Schon (4849963)
Olavo Pires de Camargo (4849966)
Túlio Diniz Fernandes (4849945)

February 2018

Biomechanical parameters at 12 weeks: Mean value and standard deviation for specimens in the Low-...

Biomechanical and biochemical properties of self-assembled constructs in phase I, normalized to control values.

Benjamin D. Elder (48086)
Kyriacos A. Athanasiou (48087)

February 2013

HP application at 5 or 10 MPa, 0 Hz, resulted in a significantly higher (a) aggregate modulus, (b...

Correlation between fracture load (measured using a three-point bending test) and BSI ( = CSMI×vCtBMD).

Jui-Ting Hsu (296143)
Ying-Ju Chen (296144)
Ming-Tzu Tsai (296145)
Howard Haw-Chang Lan (296146)
Fu-Chou Cheng (296147)
Michael Y. C. Chen (296148)
Shun-Ping Wang (296150)

February 2013

Correlation between fracture load (measured using a three-point bending test) and BSI ( = CSMI×vC...

Biomechanical analysis.

J. H. Duncan Bassett (145971)
Apostolos Gogakos (145975)
Jacqueline K. White (119191)
Holly Evans (145980)
Richard M. Jacques (145985)
Anne H. van der Spek (145990)
Ramiro Ramirez-Solis (119181)
Edward Ryder (145998)
David Sunter (146002)
Alan Boyde (146008)
Michael J. Campbell (5833)
Peter I. Croucher (146016)
Graham R. Williams (20148)

August 2012

A, Load-displacement curve from a WT tibia showing yield load, maximum load, fracture load...

Values of the biomechanical test (mean ± SD; axial force, N; torsional torque, N.mm).

Yu Ding (54012)
Dike Ruan (434315)
Keith D. K. Luk (588271)
Qing He (351975)
Chaofeng Wang (588272)

June 2014

Values of the biomechanical test (mean ± SD; axial force, N; torsional torque, N.mm).</p

List of quantitative biomechanical parameters considered by this research; and related abbreviations (n = 25).

Moreno D'Amico (4167364)
Edyta Kinel (4167370)
Piero Roncoletta (4167367)

June 2017

List of quantitative biomechanical parameters considered by this research; and related abbreviati...

Mean stiffness results under volar and dorsal bending between groups.

Xiong Liu (43564)
Wei-dong Wu (606976)
Ya-feng Fang (606977)
Mei-chao Zhang (606978)
Wen-hua Huang (606979)

July 2014

Stiffness values of each group under volar and dorsal bending load were not significantly differe...

Correlation between fracture load (measured using a three-point bending test) and areal BMD (measured using DXA).

Jui-Ting Hsu (296143)
Ying-Ju Chen (296144)
Ming-Tzu Tsai (296145)
Howard Haw-Chang Lan (296146)
Fu-Chou Cheng (296147)
Michael Y. C. Chen (296148)
Shun-Ping Wang (296150)

February 2013

Correlation between fracture load (measured using a three-point bending test) and areal BMD (meas...

Macro-biomechanical parameters measured by three-point bending test.

Abstract

Extracted data

Macro-biomechanical parameters measured by three-point bending test.

Abstract

Extracted data

Related items

Related items