Add to ORKGA short Nb3Sn dipole model based on a single-bore cos-theta coil with a cold iron yoke has been fabricated and tested at Fermilab. Field quality was measured at room temperature during magnet fabrication and at liquid helium temperature. This paper reports the results of magnetic measurements. The geometrical harmonics, coil magnetization effects caused by persistent currents in the superconductor, eddy currents in the cable, and the "snap-back " effect at injection are presented and compared with theoretical predictions.
The Superconducting Magnet Group at Lawrence Berkeley Laboratory has been developing racetrack techn...
Fermilab is developing high field superconducting dipole magnets based on Nb/sub 3/Sn for a post-LHC...
As part of the High Field Magnet program at Fermilab three cos({theta}) magnets--two mirror dipole m...
Three short Nb3Sn dipole models based on a single-bore cos-theta coil and a cold iron yoke have been...
Three short Nb{sub 3}Sn dipole models based on a single-bore cos-theta coil and a cold iron yoke hav...
Two short Nb{sub 3}Sn dipole models based on a single-bore cos-theta coil with a cold iron yoke were...
FNAL and CERN are carrying out a joint R&D program with the goal of building a 5.5-m-long twin-a...
FNAL and CERN are carrying out a joint R&D; program with the goal of building a 5.5-m-long twin-aper...
HD3 is the latest magnet of a series of block-type Nb$_3$Sn dipole model magnets developed by the Su...
A short dipole model with the 10-11 T nominal field based on the Nb3Sn superconducting strand is bei...
HD3 is the latest magnet of a series of block-type Nb3Sn dipole model magnets developed by the Super...
HD3 is the latest magnet of a series of block-type Nb3Sn dipole model magnets developed by the Super...
A cosine theta type dipole magnet using Nb{sub 3}Sn conductor have been designed, built and tested. ...
As a first step towards the development of a high field Nb{sub 3}Sn superconducting dipole for a Ver...
A series of 1-m long Nb3Sn dipole magnets have been built at Fermilab in an attempt to refine the wi...
The Superconducting Magnet Group at Lawrence Berkeley Laboratory has been developing racetrack techn...
Fermilab is developing high field superconducting dipole magnets based on Nb/sub 3/Sn for a post-LHC...
As part of the High Field Magnet program at Fermilab three cos({theta}) magnets--two mirror dipole m...
Three short Nb3Sn dipole models based on a single-bore cos-theta coil and a cold iron yoke have been...
Three short Nb{sub 3}Sn dipole models based on a single-bore cos-theta coil and a cold iron yoke hav...
Two short Nb{sub 3}Sn dipole models based on a single-bore cos-theta coil with a cold iron yoke were...
FNAL and CERN are carrying out a joint R&D program with the goal of building a 5.5-m-long twin-a...
FNAL and CERN are carrying out a joint R&D; program with the goal of building a 5.5-m-long twin-aper...
HD3 is the latest magnet of a series of block-type Nb$_3$Sn dipole model magnets developed by the Su...
A short dipole model with the 10-11 T nominal field based on the Nb3Sn superconducting strand is bei...
HD3 is the latest magnet of a series of block-type Nb3Sn dipole model magnets developed by the Super...
HD3 is the latest magnet of a series of block-type Nb3Sn dipole model magnets developed by the Super...
A cosine theta type dipole magnet using Nb{sub 3}Sn conductor have been designed, built and tested. ...
As a first step towards the development of a high field Nb{sub 3}Sn superconducting dipole for a Ver...
A series of 1-m long Nb3Sn dipole magnets have been built at Fermilab in an attempt to refine the wi...
The Superconducting Magnet Group at Lawrence Berkeley Laboratory has been developing racetrack techn...
Fermilab is developing high field superconducting dipole magnets based on Nb/sub 3/Sn for a post-LHC...
As part of the High Field Magnet program at Fermilab three cos({theta}) magnets--two mirror dipole m...