Add to ORKGThree short Nb3Sn dipole models based on a single-bore cos-theta coil and a cold iron yoke have been fabricated and tested at Fermilab. This paper summarizes the results of magnetic measurements in those models. The geometrical harmonics, coil magnetization effects, cable eddy currents with and without a stainless steel core, and the "snap-back " effect at injection are presented.
The Superconducting Magnet Group at Lawrence Berkeley Laboratory has been developing racetrack techn...
This paper describes the double aperture dipole magnets developed for a VLHC based on Nb{sub 3}Sn su...
This chapter reports on the European Organization for Nuclear Research (CERN)–ELIN Nb$_{3}$Sn dipole...
Three short Nb{sub 3}Sn dipole models based on a single-bore cos-theta coil and a cold iron yoke hav...
A short Nb3Sn dipole model based on a single-bore cos-theta coil with a cold iron yoke has been fabr...
Two short Nb{sub 3}Sn dipole models based on a single-bore cos-theta coil with a cold iron yoke were...
A series of 1-m long Nb3Sn dipole magnets have been built at Fermilab in an attempt to refine the wi...
A cosine theta type dipole magnet using Nb{sub 3}Sn conductor have been designed, built and tested. ...
As part of the High Field Magnet program at Fermilab three cos({theta}) magnets--two mirror dipole m...
FNAL and CERN are carrying out a joint R&D program with the goal of building a 5.5-m-long twin-a...
FNAL and CERN are carrying out a joint R&D; program with the goal of building a 5.5-m-long twin-aper...
This chapter reports on the University of Twente (UT)–European Organization for Nuclear Research (CE...
Fermilab is working on the development of Nb{sub 3}Sn accelerator magnets using shell-type dipole co...
A series of 1-m long Nb{sub 3}Sn dipole models has been built at Fermilab in an attempt to refine th...
As a first step towards the development of a high field Nb{sub 3}Sn superconducting dipole for a Ver...
The Superconducting Magnet Group at Lawrence Berkeley Laboratory has been developing racetrack techn...
This paper describes the double aperture dipole magnets developed for a VLHC based on Nb{sub 3}Sn su...
This chapter reports on the European Organization for Nuclear Research (CERN)–ELIN Nb$_{3}$Sn dipole...
Three short Nb{sub 3}Sn dipole models based on a single-bore cos-theta coil and a cold iron yoke hav...
A short Nb3Sn dipole model based on a single-bore cos-theta coil with a cold iron yoke has been fabr...
Two short Nb{sub 3}Sn dipole models based on a single-bore cos-theta coil with a cold iron yoke were...
A series of 1-m long Nb3Sn dipole magnets have been built at Fermilab in an attempt to refine the wi...
A cosine theta type dipole magnet using Nb{sub 3}Sn conductor have been designed, built and tested. ...
As part of the High Field Magnet program at Fermilab three cos({theta}) magnets--two mirror dipole m...
FNAL and CERN are carrying out a joint R&D program with the goal of building a 5.5-m-long twin-a...
FNAL and CERN are carrying out a joint R&D; program with the goal of building a 5.5-m-long twin-aper...
This chapter reports on the University of Twente (UT)–European Organization for Nuclear Research (CE...
Fermilab is working on the development of Nb{sub 3}Sn accelerator magnets using shell-type dipole co...
A series of 1-m long Nb{sub 3}Sn dipole models has been built at Fermilab in an attempt to refine th...
As a first step towards the development of a high field Nb{sub 3}Sn superconducting dipole for a Ver...
The Superconducting Magnet Group at Lawrence Berkeley Laboratory has been developing racetrack techn...
This paper describes the double aperture dipole magnets developed for a VLHC based on Nb{sub 3}Sn su...
This chapter reports on the European Organization for Nuclear Research (CERN)–ELIN Nb$_{3}$Sn dipole...