Add to ORKGTribological behavior of Cu–MoS2 and Ag–MoS2 nanocomposite lubricant was studied. Cu nanoparticles produced by electrical explosion of copper wires and Ag nanoparticles prepared by electrospark erosion were employed as metal cladding modifiers of MoS2 nanolamellar particles. The tribological tests showed Cu–MoS2 and Ag–MoS2 nanocom-posite lubricants changed the friction coefficient of the initial grease and essentially improved its wear resistance
Purpose – The purpose of this paper is to investigate the possibility of using the iron nanoparticle...
The tribological properties of mineral oil SAE 10 modified with metallic nanoparticles were investig...
The paper discusses an influence of lubricating and cutting fluids modification on tribological prop...
In recent years, numerous studies have been carried out on the effects of nano-particles (NP) as lub...
Tribological investigations were performed on mineral oil containing Fe, Cu and Co nanoparticles and...
This study presents tribological enhancement properties of 40–80 nm copper (II) oxide (CuO, nanopowd...
The paper deals with the influence of base oils (applied for lubricating and cutting fluids compound...
Finely dispersed copper nanoparticles were added as an additive to fully-formulated engine oils. The...
AbstractNano-copper usually serve for lubricating additives in tribology field. The antiwear and red...
Finely dispersed copper nanoparticles were added as an additive to fully-formulated engine oils. The...
Nanoparticles have as characteristics super sliding, extreme pressure, self-healing, etc., which can...
In this paper we have investigated the tribological properties of solid lubricant coatings from Mo2S...
.The LB ®lm of MoS nanoparticles coated with dialkyldithiophosphate DDP was prepared on a copper-coa...
Tribological properties that include nanoparticles are an alternative to improve the tribological be...
Tribological properties that include nanoparticles are an alternative to improve the tribological be...
Purpose – The purpose of this paper is to investigate the possibility of using the iron nanoparticle...
The tribological properties of mineral oil SAE 10 modified with metallic nanoparticles were investig...
The paper discusses an influence of lubricating and cutting fluids modification on tribological prop...
In recent years, numerous studies have been carried out on the effects of nano-particles (NP) as lub...
Tribological investigations were performed on mineral oil containing Fe, Cu and Co nanoparticles and...
This study presents tribological enhancement properties of 40–80 nm copper (II) oxide (CuO, nanopowd...
The paper deals with the influence of base oils (applied for lubricating and cutting fluids compound...
Finely dispersed copper nanoparticles were added as an additive to fully-formulated engine oils. The...
AbstractNano-copper usually serve for lubricating additives in tribology field. The antiwear and red...
Finely dispersed copper nanoparticles were added as an additive to fully-formulated engine oils. The...
Nanoparticles have as characteristics super sliding, extreme pressure, self-healing, etc., which can...
In this paper we have investigated the tribological properties of solid lubricant coatings from Mo2S...
.The LB ®lm of MoS nanoparticles coated with dialkyldithiophosphate DDP was prepared on a copper-coa...
Tribological properties that include nanoparticles are an alternative to improve the tribological be...
Tribological properties that include nanoparticles are an alternative to improve the tribological be...
Purpose – The purpose of this paper is to investigate the possibility of using the iron nanoparticle...
The tribological properties of mineral oil SAE 10 modified with metallic nanoparticles were investig...
The paper discusses an influence of lubricating and cutting fluids modification on tribological prop...