Add to ORKGThe purpose of the damping ring in the KEK acceler-ator test facility (ATF) is to develop the technologies to achieve a lower emittance beam that required in the future linear collider such as JLC. To avoid the unacceptable emittance growth, vac-uum chambers were designed to have a low impedance to suppress single bunch instabilities. The actual impedance of the ring was evaluated by measuring the intensity dependence of the bunch length. We report the results of the present impedance measurement of the ATF damping ring
An important action item for the damping rings of the International Linear Collider (ILC) is to com...
The impedance represented by the beam surroundings leads to collective effects which limit the inten...
We describe in this paper a measurement of vertical emittance in the Accelerator Test Facility (ATF)...
Abstract WI,(S) for the bunch with an arbitrary longitudinal charge In order to estimate the possibi...
The paper summarizes results on the numerical impedance study of the vacuum components in the ATF da...
The purpose of the ATF damping ring is the development of technologies for producing a low emittance...
The ATF (Accelerator Test Facility in KEK) damping ring has been designed to produce the low emittan...
The Accelerator Test Facility (ATF) at KEK is a test accelerator for future linear colliders. Its pu...
In future e+e- linear colliders, such as the JLC/NLC, damping rings are needed to generate beams of ...
The Damping Rings (DRs) complex of the Compact LInear Collider (CLIC) has to provide ultra low emitt...
The Damping Rings (DRs) complex of the Compact LInear Collider (CLIC) has to provide ultra low emitt...
The Damping Rings (DRs) complex of the Compact LInear Collider (CLIC) has to provide ultra low emitt...
The measurement of resonance driving terms in the Damping Ring of the Accelerator Test Facility in K...
The Compact Linear Collider (CLIC) is a 3 TeV eÅe¡ machine, currently under design at CERN, that tar...
INTRODUCTION The construction of the 1.54 GeV damping ring in KEK Accelerator Test Facility (ATF) i...
An important action item for the damping rings of the International Linear Collider (ILC) is to com...
The impedance represented by the beam surroundings leads to collective effects which limit the inten...
We describe in this paper a measurement of vertical emittance in the Accelerator Test Facility (ATF)...
Abstract WI,(S) for the bunch with an arbitrary longitudinal charge In order to estimate the possibi...
The paper summarizes results on the numerical impedance study of the vacuum components in the ATF da...
The purpose of the ATF damping ring is the development of technologies for producing a low emittance...
The ATF (Accelerator Test Facility in KEK) damping ring has been designed to produce the low emittan...
The Accelerator Test Facility (ATF) at KEK is a test accelerator for future linear colliders. Its pu...
In future e+e- linear colliders, such as the JLC/NLC, damping rings are needed to generate beams of ...
The Damping Rings (DRs) complex of the Compact LInear Collider (CLIC) has to provide ultra low emitt...
The Damping Rings (DRs) complex of the Compact LInear Collider (CLIC) has to provide ultra low emitt...
The Damping Rings (DRs) complex of the Compact LInear Collider (CLIC) has to provide ultra low emitt...
The measurement of resonance driving terms in the Damping Ring of the Accelerator Test Facility in K...
The Compact Linear Collider (CLIC) is a 3 TeV eÅe¡ machine, currently under design at CERN, that tar...
INTRODUCTION The construction of the 1.54 GeV damping ring in KEK Accelerator Test Facility (ATF) i...
An important action item for the damping rings of the International Linear Collider (ILC) is to com...
The impedance represented by the beam surroundings leads to collective effects which limit the inten...
We describe in this paper a measurement of vertical emittance in the Accelerator Test Facility (ATF)...