Adjustable Sound Absorber of Multiple Parallel-Connection Helmholtz Resonators with Tunable Apertures Prepared by Low-Force Stereolithography of Photopolymer Resin

The variable noise spectrum for many actual application scenarios requires a sound absorber to adapt to this variation. An adjustable sound absorber of multiple parallel-connection Helmholtz resonators with tunable apertures (TA–MPCHRs) is prepared by the low-force stereolithography of photopolymer resin, which aims to improve the applicability of the proposed sound absorber for noise with various frequency ranges. The proposed TA–MPCHR metamaterial contains five metamaterial cells. Each metamaterial cell contains nine single Helmholtz resonators. It is treated as a basic structural unit for an array arrangement. The tunable aperture is realized by utilizing four segments of extendable cylindrical chambers with length l0, which indicates that the length of the aperture l is in the range of [l0, 4l0], and that it is tunable. With a certain group of specific parameters for the proposed TA–MPCHR, the influence of the tunable aperture with a variable length is investigated by acoustic finite element simulation with a two-dimensional rotational symmetric model. For the given noise spectrum of certain actual equipment with four operating modes, the TA–MPCHR sample with a limited total thickness of 40 mm is optimized, which is made of photopolymer resin by the low-force stereolithography, and its actual average sound absorption coefficients for the frequency ranges of 500–800 Hz, 550–900 Hz, 600–1000 Hz and 700–1150 Hz reach 0.9203, 0.9202, 0.9436 and 0.9561, respectively. Relative to common non-adjustable metamaterials, the TA–MPCHR made of photopolymer resin can reduce occupied space and improve absorption efficiency, which is favorable in promoting its practical applications in the noise pollution prevention