Objectification of Calculation of Passing Sight Distance Parameters

Overtaking maneuver is very complex event influenced by many parameters. The most important parameters are vehicle performance, longitudinal slope, the speed at the beginning of the maneuver, the reaction time of the driver. Overtaking distance at CSN 73 6101 is determined on the basis of a simplified physical model. It considers constant speed of vehicles (overtaking and overtaken) and it does not consider a longitudinal gradient of road. This calculation is used for several decades and it is required to verify this procedure. That was the purpose of this work. Detailed physical model was performed for several types of passenger vehicles, performance curves and gear changes were included too. Distances between vehicles at the beginning and in the end of the maneuver were chosen with regard to reaction times of drivers. Distances were compared with conclusions of observation studies. Input values of some parameters were determined by own measurement and compared with data reported in the literature. The analysis was performed using the video camera positioned at the front and rear of the vehicle. For selected vehicle were conducted simulations testing the influence of particular parameters. The parameters with the biggest influence were longitudal slope of the road and rolling friction. To achieve results useful for a possible regulations update for the design of roads another simulation models for 43 variants of passenger cars with different engines and transmissions were done. The vehicles were divided into categories based on engine capacity and engine power (up to 1400 ccm, over 1400 ccm; 66 kW to over 66 kW). Results were compiled in tabular form that could be used to discuss modifications to CSN 73 6101 Design of roads