Family house with an establishment

The aim of my bachelor thesis is to design and elaborate project documentation for the construction of a building with a design office in the cadastral area of Mikulovice near Pardubice. It is a two-storey, partly basement detached house, which with its layout corresponds to the conditions of the building operation. The family house is designed for a four-member family. On the first underground floor there is a toilet + bathroom with a technical room and a gym. On the ground floor there is a project office that is designed for the owner of the house, a kitchen, a living room, a guest room with its own dressing room, a workshop connected with a garage. On the second floor there is a residential part, consisting of 3 rooms and a studio. The construction system of the building is designed from the POROTHERM system with an ISOVER GREYWALL external contact insulation system with a thickness of 120 mm. The vertical supporting perimeter structures of the 1st floor, the 1st NP and the 2nd NP will be wired from the POROTHERM 30 P + D. The internal bearing walls are made of POROTHERM 30 P + D and the POROTHERM 19 AKU and POROTHERM 11,5 PROFI are used for non-load-bearing masonry. The external plaster is a water-repellent CEMIX FLEXI thin-film plaster grooved with a grain size of 2 mm in light gray. The staircase is monolithic, of reinforced concrete. Horizontal bearing structures are made of ceramic-concrete system of POROTHERM with the thickness of 250 mm (Pot girders and Miako fillers). The roof is double-pitched with the roof tiling in black colour of TONDACH Hranice 11. The plastic doors and windows are designed in the colour of grey ane white; the garage has a section door also in the grey colour. The flooring has been chosen according to the type of usage of each of the rooms, i.e. ceramic flooring and laminate floor. The main aim of my work was to design a layout for the particular purpose, i.e. a suitable solution of the structure and a draft of technical documentati