Electron microscopy study of nanostructured thin film catalysts for micro-fuel cell application

Present doctoral thesis is focused on electron microscopy and spectroscopy investigation of novel metal-oxide anode catalyst for fuel cell application. Catalyst based on Pt- doped cerium oxide in form of thin layers prepared by simultaneous magnetron sputtering deposition on intermediate carbonaceous films grown on silicon substrate has been studied. The influence of catalyst support composition (a-C and CNx films), deposition time of CeOx layer and other deposition parameters, as deposition rate, composition of working atmosphere and Pt concentration on the morphology of Pt-CeOx layers has been investigated mainly by Transmission Electron Microscopy (TEM). The obtained results have shown that by suitable preparation conditions combination we are able to tune final morphology and composition of catalyst. Composition of carbonaceous films and Pt-CeOx layers was examined by complementary spectroscopy techniques - Energy Dispersive X-ray Spectroscopy (EDX), Electron Energy Loss Spectroscopy (EELS) and X-ray Photoelectron Spectroscopy (XPS). Such prepared porous structures of Pt-CeOx are of promising as anode catalytic material for real fuel cell application. Keywords: cerium oxide, platinum, fuel cell, magnetron sputtering, Transmission Electron Microscop