Experimental Investigation into the Influence of Backfill Types on the Vibro-acoustic Characteristics of Leaks in MDPE Pipe

Pipe leak location estimates are commonly conducted using Vibro-Acoustic Emission (VAE) based methods, usually using accelerometers or hydrophones. Successful estimation of a leak's location is dependent on a number of factors, including the speed of sound, resonance, backfill, reflections from other sources, leak shape and size. However, despite some investigation into some of the aforementioned factors, the influence of backfill type on a leak's VAE signal has still not been experimentally quantified. A limited number of studies have attempted to quantify the effects of backfill. However, all of these studies couple other variables which could be equally responsible for their observed changes in leak signal. There have been no controlled studies where one variable can be directly compared to one another (i.e. all variables remain constant, only changing backfill type). The aim of this paper is to better characterise the influence of backfill on a leak's VAE signal by individually isolating all variables. For the first time, this paper demonstrates the influence of backfill on leak VAE signal by keeping all other variables consistent. It was found that the backfill type had a strong influence on the frequency and amplitude of leak signals, which is likely to have a significant impact on the accuracy of leak location estimates