Entry, Descent and Landing (EDL) Modeling and Simulation (MS) is an enabling capability for complex NASA entry missions such as MSL and Orion. MS is used in every mission phase to define mission concepts, select appropriate architectures, design EDL systems, quantify margin and risk, ensure correct system operation, and analyze data returned from the entry. In an environment where it is impossible to fully test EDL concepts on the ground prior to use, accurate MS capability is required to extrapolate ground test results to expected flight performance
On August 6, 2012, the Mars Science Laboratory rover, Curiosity, successfully landed on the surface ...
This presentation was part of the session : Strategic PerspectivesSixth International Planetary Prob...
In 2012, the Mars Science Laboratory (MSL) mission will pioneer the next generation of robotic Entry...
ESM (Entry Systems Modeling Project) is the only dedicated research effort for EDL (Entry, Descent a...
The NASA Engineering and Safety Center (NESC) was requested to establish the Simulation Framework fo...
The NASA Engineering and Safety Center (NESC) was requested to establish the Simulation Framework fo...
Keynote presentation highlighting aerothermal modeling needs for EDL, with specific emphasis on area...
The Entry Systems Modeling (ESM) technology development project, initiated in 2012 under NASAs Game ...
With any space related mission, the unknown effects are often some of the most important design cons...
This paper describes recent development of modeling and simulation technologies for entry systems an...
Thesis (Ph.D.)--University of Washington, 2021Design of a spacecraft and mission architecture that p...
Because Entry, Descent and Landing (EDL) system validations are limited in Earth environments, these...
This talk will provide an overview of investments in the Entry Systems Modeling project, along with ...
AIAA Astrodynamics Specialist Conference August 2006, Keystone, CO.Entry, descent, and landing (EDL...
ESM was created with two primary technical areas: Aerosciences and Materials. One of the first proje...
On August 6, 2012, the Mars Science Laboratory rover, Curiosity, successfully landed on the surface ...
This presentation was part of the session : Strategic PerspectivesSixth International Planetary Prob...
In 2012, the Mars Science Laboratory (MSL) mission will pioneer the next generation of robotic Entry...
ESM (Entry Systems Modeling Project) is the only dedicated research effort for EDL (Entry, Descent a...
The NASA Engineering and Safety Center (NESC) was requested to establish the Simulation Framework fo...
The NASA Engineering and Safety Center (NESC) was requested to establish the Simulation Framework fo...
Keynote presentation highlighting aerothermal modeling needs for EDL, with specific emphasis on area...
The Entry Systems Modeling (ESM) technology development project, initiated in 2012 under NASAs Game ...
With any space related mission, the unknown effects are often some of the most important design cons...
This paper describes recent development of modeling and simulation technologies for entry systems an...
Thesis (Ph.D.)--University of Washington, 2021Design of a spacecraft and mission architecture that p...
Because Entry, Descent and Landing (EDL) system validations are limited in Earth environments, these...
This talk will provide an overview of investments in the Entry Systems Modeling project, along with ...
AIAA Astrodynamics Specialist Conference August 2006, Keystone, CO.Entry, descent, and landing (EDL...
ESM was created with two primary technical areas: Aerosciences and Materials. One of the first proje...
On August 6, 2012, the Mars Science Laboratory rover, Curiosity, successfully landed on the surface ...
This presentation was part of the session : Strategic PerspectivesSixth International Planetary Prob...
In 2012, the Mars Science Laboratory (MSL) mission will pioneer the next generation of robotic Entry...