Add to ORKGA springboard, as commonly used in diving, is considered. It is hinged at the rear end and rests free on a rubber fulcrum at the middle of the board. If an excentric load is applied to its front end, then due to torsion it is possible that the board is lifted away from the fulcrum along a certain distance. This problem is investigated for a static load. Although a linear small displacement theory is applied, the problem is nonlinear due to the unknown length of noncontact
The classical problem of the deflection of a cantilever beam of linear elastic material, under the a...
In springboard diving the effect of the fulcrum setting on height generated by the backward press ha...
We study small vibrations of cantilever beams contacting a rigid surface. We study two cases: the ...
A springboard, as commonly used in diving, is considered. It is hinged at the rear end and rests fre...
Introduction. Springboards used in diving are hinged at the rear end and rest free on a movable fulc...
INTRODUCTION AND RESULTS This paper deals with the mechanics of take-off from a springboard by apply...
AbstractAnalysis of springboards in elite diving have been limited to the measurement of the variati...
Analysis of springboards in elite diving have been limited to the measurement of the variation of ma...
The maneuvers of a competition diver on a springboard before takeoff may serve to maximize the heigh...
International audienceThe interaction between a diver and a diving board is one of the key factors o...
The present paper deals with large deflections and deformations of beams. As a novel aspect in the n...
Abstract. The nonlinear bending problem of a beam embedded in a Winkler soil with clearances is addr...
The classical problem of the deflection of a cantilever beam of linear elastic material, under the a...
In springboard diving the effect of the fulcrum setting on height generated by the backward press ha...
We study small vibrations of cantilever beams contacting a rigid surface. We study two cases: the ...
A springboard, as commonly used in diving, is considered. It is hinged at the rear end and rests fre...
Introduction. Springboards used in diving are hinged at the rear end and rest free on a movable fulc...
INTRODUCTION AND RESULTS This paper deals with the mechanics of take-off from a springboard by apply...
AbstractAnalysis of springboards in elite diving have been limited to the measurement of the variati...
Analysis of springboards in elite diving have been limited to the measurement of the variation of ma...
The maneuvers of a competition diver on a springboard before takeoff may serve to maximize the heigh...
International audienceThe interaction between a diver and a diving board is one of the key factors o...
The present paper deals with large deflections and deformations of beams. As a novel aspect in the n...
Abstract. The nonlinear bending problem of a beam embedded in a Winkler soil with clearances is addr...
The classical problem of the deflection of a cantilever beam of linear elastic material, under the a...
In springboard diving the effect of the fulcrum setting on height generated by the backward press ha...
We study small vibrations of cantilever beams contacting a rigid surface. We study two cases: the ...